1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Seat covers & tail lights don't work

Discussion in 'Suzuki Carry' started by do it best 4x4, Jun 14, 2010.

  1. do it best 4x4

    do it best 4x4 New Member

    Where can you buy or get seat covers for a suzuki 2000 carry?
    Any good ideas where to start looking for problem with tail lights and dash light, it blows fuse right away.??
     
  2. Stuff99

    Stuff99 Moderator Staff Member

    aftermarket radio in the truck? most likely wired wrong.
     
  3. do it best 4x4

    do it best 4x4 New Member

    radio

    I just put in a new radio with speakers, how do you wire it?
    I took it back out, cut all wires and it still blow fuse???
     
  4. fupabox

    fupabox Well-Known Member

    the stock radio illumination wire will appear as a ground unless the lights are on when you check it..
     
  5. Little Foot

    Little Foot Member

    Radio

    R/Y = lights on; Red with yellow stripe
    W/B = ignition on; White with black stripe "This is the one you should use for radio power"
    W = Battery power from 15A fuse and fusible link "always on" Use only this one for radio memory if radio needs it. Most new radios have battery back-up built-in.
    R/Y is not a ground!!!! Use dash metal for ground

    If your W/B wire is touching dash metal it will blow 15amp fuse.

    If your W wire is touching dash metal it will blow different 15amp fuse.

    If your R/Y wire is touching dash metal and you turn on lights it will blow same 15amp fuse as W wire.
     

    Attached Files:

    Last edited: Jun 14, 2010
    PeterNoTail likes this.
  6. Stuff99

    Stuff99 Moderator Staff Member

    ya most people are getting the ground wrong and blowing fuses.
     

Share This Page