1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

S83p ignition coil?

Discussion in 'Daihatsu Hi jet' started by Tripthyme, Nov 25, 2022.

  1. Tripthyme

    Tripthyme Active Member Supporting Member

    Daihatsu part number is 90048-52084
    Then it says diamond f-604

    Anyone know what I can use in its place? I have searched for the last couple evenings with no luck on aftermarket crosses....

    .ine is more like this https://images.app.goo.gl/3dyYhU322saAkrs89
    Not the one with the resistor on the side
     
    Last edited: Nov 25, 2022
  2. shogun

    shogun Active Member

    check this: BREMI Ignition Coil 20577, CROSS REFERENCE AND OE NUMBER LIST, quote: BREMI 20577
    DAIHATSU: 19500-87201, 19500-87201-000, 19500-87202, 90047-52079, 90048-52070, 90048-52072, 90048-52072-000,90048-52077, 90048-52078, 90048-52084, 90048-52084-000, 90048-52085, 90048-52086, 90048-52093, 90048-52093-000, 90048-52095, 90048-52095-000, 90048-52098, 90048-52099, 90048-52109-000
    INTERNATIONAL HARV. 90048-52084-000, INTERNATIONAL HARV. 90048-52091-000, PIAGGIO 90048-52084-000
    https://www.ebay.com/itm/155140367585

    cheaper than a used one from Daihatsu https://autoparts.beforward.jp/detail/Electrical-Parts/Ignition-Coils/PA66775692/
    Bremi is good quality
     
    JMM likes this.
  3. Jigs-n-fixtures

    Jigs-n-fixtures Well-Known Member

    Do you have an external resistor? If so, measure the resistance, (probably 3 to 5-ohms), and you can replace it with just about any coil which has the correct resistance, or get a coil which needs an external resistor.
     
  4. Tripthyme

    Tripthyme Active Member Supporting Member

    No external resistor. I found one old stock new in box for 40$ havent pulled the trigger yet. I need to get my alternator wires loomed and weather sealed and back in the bracket, then new alternator on. New starter on. New belt. New engine grounds. Fire him back up then ill get into testing and being 100% sure I need it. Its just so damn cold and I have life in the way haha
     
  5. IvanL

    IvanL New Member


    Just a quick update - the BREMI coil in this ad does not fit. The coil tower is not the same as the 90048-52084-000
     

Share This Page