I have a 94 acty sdx 4wd that was idling rough, randomly stalling, hard to start hot, and would run alittle better with the air filter cover taken off. I've narrowed it down to the air solenoid, tested it with 12v and no click . My question is, do I have to pull the whole carb to remove it? Is there anything I should replace at the same time? Who sells these with the fastest shipping?
On my 1997 Acty I could remove both w/o pulling the carb Here you have the part numbers of both valves based on my 1997 E07A engine 16031-PZ3-000 SOLENOID, AIR VENT CUT 16024-PZ3-000 SOLENOID, SLOW CUT http://jp-carparts.com/honda/part_d...TY TRUCK&cartype=30822&fig=E&fig1=100&fig2=13 I would replace both, when I bought my ones at the local Honda dealer, the service man there told me that they last max. 100.000 km. My ones I replaced/had to replace with 55.000 km. Air solenoid https://usminitrucks.com/parts-store/ols/products/honda-acty-air-vent-solenoid Fuel solenoid https://usminitrucks.com/parts-store/ols/products/honda-acty-fuel-cut-solenoid check Yokohama Motors for prices and delivery https://yokohamamotors.net/store/index.html also change the O2 sensor, if never changed they are slow reacting. I used an aftermarket one, Genuine number for reference: 36531 – P1 A – 003 | 36531 – P1 A – 004 | 36531 – PZ3 – 902 36531 – PZ3 – N02 for my HA3 E07 A