1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HELP! I CAN'T GET IT TO IDLE

Discussion in 'Daihatsu Hi jet' started by DaRedneck, Apr 17, 2024.

  1. DaRedneck

    DaRedneck New Member

    Hey everyone. I am an absolute newbie when it comes to Kei trucks, but I picked up a junkyard special '93 Hi Jet s83p, and well, it runs, but not very well. It starts very hard, and once it does, it has to idle high, and when I try to lower the idle, it chokes out and dies. Full disclosure, I do have that generic Chinese aftermarket carburetor on it. The one that is on literally every eBay listing when you search for a replacement carb. I've read through other chats, but none of the ideas listed seem to help. I tried adjusting the mixture and air screws, but it didn't seem to change anything. I'm out of ideas unless it has something to do with vacuum lines, of which this truck has about a million. If anyone has done a carburetor swap, I'd appreciate any advice. thanks
     
  2. KevinK

    KevinK Member

    https://www.ebay.com/itm/305198321123

    This will solve all of your carb issues!

    Through one on today and had the hijet running circles around the ranch after about 2 hours installing.

    For the record: original carb was rebuilt, tried aftermarket carb to no reasonable standard
     
  3. Deerhunter1396

    Deerhunter1396 New Member

    Hey daredneck I have the same exact carb and if you look by the throttle you’ll see a tab u need to bend it up because it prevents the throttle from shutting completely
     
  4. Oregon77

    Oregon77 New Member

    I have a 91 Hi Jet s83p with carburetor issues so the carburetor that you recommended that’s on eBay will that fit right on my truck and do I use the same linkage or do I have to buy a different bracket or linkage
     
  5. KevinK

    KevinK Member

    It comes with everything that you will need, except for a choke cable.
     

Share This Page