1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fan Belt Size

Discussion in 'Daihatsu Hi jet' started by SWERVIN, Sep 1, 2010.

  1. SWERVIN

    SWERVIN New Member

    I searched and didn't find an answer. I have a S83P no a/c 93 model. The "fan belt" actually alternator and waterpump belt jumped off today and I don't have the old one to reference. Does anyone have a part number or belt size that will get me close? I should be a V-pully type.

    Thanks
     
    SWERVIN, Sep 1, 2010
    #1
  2. fupabox

    fupabox Well-Known Member

    10mm x 800mm
     
    fupabox, Sep 2, 2010
    #2
  3. jimhoodag

    jimhoodag New Member

    What size fan belt goes on an 1994 HiJet S110P with air conditioning?
     
    jimhoodag, Sep 3, 2010
    #3
  4. fupabox

    fupabox Well-Known Member

    gates GATK040325 from what i can see
     
    Last edited: Sep 3, 2010
    fupabox, Sep 3, 2010
    #4
  5. nsmilligan

    nsmilligan Guest

    I just replaced the belt on my S83P, the 10mmX800mm was a bit too long went with a 10mmX777mm (Napa UNR2572300) put the alternator right in the middle of the adjustment range.

    Cheers

    Bill
     
    nsmilligan, May 13, 2015
    #5
    Noleftturn60 and Limestone like this.
  6. Jeffrey Doan

    Jeffrey Doan New Member

    I just went through another fan belt on my S83P! The last one I got from O'Reilly's, but it was 12mm wide! Too big! After reading the post from NSMilligan I am going to try a 10mmx777mm. It is a Gates 7300, available from most auto parts stores. My local Napa didn't have it in stock, but the O'Reilly's in Cadiz KY has one in stock for $6.99! I'll be there tomorrow evening!
     
    Jeffrey Doan, Sep 28, 2019
    #6
    Sam27 likes this.
  7. Noleftturn60

    Noleftturn60 New Member

    Nice thanks
     
    Noleftturn60, Feb 14, 2024
    #7

Share This Page