The power that I get at the idle switch is only 10DC volts. I have 14+ at battery so alternator is working. Anybody know what the voltage should...
So any suggestions as to what to do about it? I was also wondering if it is a case of leaning out as the choke butterfly opens…
Thinking cap time! Cold start 95 dd51t…rpm around 2,000 running smooth. Then revs drop but quickly come back up. Runs nice for a bit then this...
Hi all. 96 Dd51t, f6a. Rebuilt head and carb. Cold idle screw (#5) all the way out. Runs good for a bit then WOT. Applying vac (with mitt vac) it...
Cheap fuel pressure regulator did the trick, though I had to figure out that when Mr. Gasket say 1psi, it really means 2. Starts good and so far...
Ummm, starting to get tired of ice cream… ordered a cheap pressure regulator cause I can’t think of anything else to check.
No start…bra, bra, bwaaa…
Sooo, while exploring the backend of the truck, I saw lines going up over spare tire. Fought with rusted bolt to get tire out (good thing I didn’t...
How much pressure is there supposed to be in gas tank? It gives quite a whoosh when I take the cap off. (Canister is already bypassed. Could that...
Wait! Dig out a new tube of ice cream…so back to really hard to start in morning. Uber flooding. Moving choke flap has no effect. Once started,...
IT’S ALIVE!!! So the carb kit had a new needle valve and seat part but it was the needle was wider than the original..oh,oh. The screw holding the...
So, took off carb, blew into gas line and closed off needle valve seat. Felt are in my cheek. This is hard to describe- with fuel inlet on right,...
Separate names with a comma.
