I put a new idle-up actuator on my carb so now it works properly and doesn't race the engine. I'm waiting for a set of bushings for the front...
I recently had a similar problem with the engine racing and not idling down and it had nothing to do with the choke. I thought it was a vac issue...
Hi Camo. I snorkeled my suzuki a few years ago and had the same problem. The air box itself didn't seal and i got water. Check to make sure the...
sorry for the slow reply Jeepy. This is the kit I bought and installed:...
installed a 2.5" lift kit ordered on ebay from a dealer in Altamont, TN. Reasonable price and shipping up to Saskatchewan, easy installation, and...
Just installed a 2.5" lift kit ordered on ebay from a dealer in Altamont, TN. Reasonable price and shipping up to Saskatchewan, easy...
I replaced the 2" rubber strut top spacers that my Carry came with for a 2 1/2 lift kit that i bought off e-bay. It got the front pumpkin a hair...
There should be a bleeder screw beside the thermostat also. You can loosen that until it stops passing air and coolant comes thru. That should get...
It sounds like a problem I had. Mine turned out to be a bad head gasket causing the coolant system to pressure up. I hope that isn't what is wrong...
The oddest thing is the fact that the belt broke without showing any signs of wear from nicks or burrs and no signs of ever having jumped. Timing...
My 660 cc F6A has been running smoother than ever, coming off a fresh rebuild, new crankshaft. I was slowing down from 80 km/h for a stop sign,...
I'd let someone else try that idea first too. There could be some major problems in getting that 110 hp to the ground, as in whether the clutch,...
check all the vacuum lines for rot and cracks. you'll see from posts on here that vac lines cause a whole lot of varied problems
This one doesn't tick. It rattles and hammers
Separate names with a comma.