Yes. Their purpose is to keep the metal top hat from hitting the top of the shock with an almighty Wham! With them you can use softer springs...
This is most likely lack of rebound damping, either by design or from wear.
Look at tan 2006/NC Miata bump stops. https://www.good-win-racing.com/Mazda-Performance-Part/61-0794.html $20 ea....
I can't remember any more. With shipping it was almost the same as NC Miata bump stops from Goodwin Racing.
Yes. And still pleased with it.
Honda Beat engine would be your best bet. It is the same block, so it should bolt up to the tranny. 63 HP and 8100 RPM. It is fuel injected,...
Your spring rate is fine, but you have too much preload. I'm running 50 Newton, 285 lb springs, they are just 250mm long (9.8"). I consider the...
I tried NA/NB 14" wheels first. They have too much offset/back spacing and hit the struts before they touched the mounting flange. Sad. They...
Since the tires/wheels do not affect the engine, there is no loss or gain in power/horsepower. The largest tires you can get on the truck...
I went from stock size, 145/80-12 to 175/65-14 on my Acty and got more ground clearance, a more accurate speedo and the same 66 MPH top speed....
I found them. What did you have to do to aim them?
I just went through that with mine. If you increase the spring rate much (you should) you'll have a good bit of trouble compressing the spring...
Yeah, me too! I'd be happy to repurpose an OEM switch that's in good shape.
Installer, What sort of fog/driving !ights are on that white Acty? Where did you get them? That's a clean look!
Shouldn't discipline and/or dismissal be the real solution?
Separate names with a comma.
