You got any go to websites for used parts? I've checked the usuals (yahoo auctions, rakuten, goo) but there's not much out there these days.
A common issue I see with mini trucks, especially acty's, around here in Northern Japan is the hinge pins rusting out on the tailgates (rear and...
Had the same issue a few years back in my Subaru, tried everything, then found a relay way down stream buried behind the dash had to , pull off...
Yeah, I'm pretty sure it's the bearing on the passenger side. Went to change it the other day but the drive shaft is good and stunk in there......
Now I'm really intrigued by this.... Just went to the local parts supplier, the listed top pin (45236-SC2-003, Pin B) has been discontinued, but...
You said it, things are not making sense. I haven't had time to take it for a longer distance drive then find the heat source, mainly I was...
I'll have to take a closer look, might have missed something. BTW after the caliper rebuild and changing the drivers side bearing, still getting...
Slide pins for an HA4 (possibly others) are two different part numbers --> 45236-SC2-003 (Top), and 45235-SC2-003 (bottom). Anyone know how to...
I just changed out the drivers front bearing, very straight forward and went smooth. One thing that did happen was I manged to push the back race...
Thanks to Shogun for pointing me to this thread. Anyone want to share their experience and lessons learned changing out their front bearings? I...
This PDF shows all the parts I used to rebuild the calipers and replace the hoses.
Did the rebuild today. Went super easy only took a couple of hours. As mentioned above, I was thinking about doing a complete wright up on how to...
Thanks! This will finally give me a chance to actually use all four of my jack stands... I knew buying more than two would come in handy at some point
Last question.... Anyone know the setup of these break lines? If I'm only messing with the fronts, will I need to bleed the rear as well? Looking...
Separate names with a comma.