What is the consensus best way to fix the charcoal canister being clogged? Current I unhooked my gas tank top vent line at the gas cap/fill to...
Do you have the charcoal canister bypassed or unplugged? Also the light will not come on unless your actuators are seeing vacuum. Post a picture...
Appears to be solved after I soldered in a new latching switch to the 4wd diff lever and switched the vacuum lines to the pictures I had above....
Here is before. I think I need to replace the coupling (middle of picture below lines) pictured in my above post with a tee but I am not sure what...
I need help if these two vacuum lines are correct. They were switched before. The valve cover line is now running under manifold. I believe this...
Fixed this issue. Rebuilt the carburetor then Discovered the teeth on the starter were being eaten so replaced the starter. Also changed the...
Also is the truck supposed to lock the front axle and switch to 4wd when you push the diff lever from 2h to 4h or 4l without holding AWD button?...
Have an s81p climber. Seems to lock the front accel when shifting the diff level from 2 h to 4h or 4l but I cannot get anything from the awd dash...
Update: I rebuilt the carb and changed the plugs. It still won't idle correctly. It settles then idles fast then settles and goes all over the...
I think I have narrowed it to the following: 1. Valve clearances are possibly wrong 2. Charcoal canister issue 3. Float / carb issue (gummy) 4....
This can be deleted. Middle on my truck is off down is acc and up for ignition. Key will only pull out in the center slot.
Can anyone confirm on an 85 hijet the valve looking filters on the vacuum lines on the carburetor are check valves? Parts 55 and 95 on the vacuum...
Separate names with a comma.
