<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:slash="http://purl.org/rss/1.0/modules/slash/">
  <channel>
    <title>Subaru Sambar</title>
    <description>Subaru Sambar</description>
    <pubDate>Tue, 16 Jun 2026 11:35:23 +0000</pubDate>
    <lastBuildDate>Tue, 16 Jun 2026 11:35:23 +0000</lastBuildDate>
    <generator>Japanese Mini Truck Forum</generator>
    <link>http://minitrucktalk.com/forums/subaru-sambar.9/</link>
    <atom:link rel="self" type="application/rss+xml" href="http://minitrucktalk.com/forums/subaru-sambar.9/index.rss"/>
    <item>
      <title>Sambar Air Filter</title>
      <pubDate>Sun, 14 Jun 2026 19:49:06 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/sambar-air-filter.28926/</link>
      <guid>http://minitrucktalk.com/threads/sambar-air-filter.28926/</guid>
      <author>invalid@example.com (Gwelo)</author>
      <dc:creator>Gwelo</dc:creator>
      <content:encoded><![CDATA[I found an air filter on Amazon which was listed as a replacement for the OEM 16546KA164. I took a chance because it was cheap! Turns out it was smaller than the Drivejoy V9112-F002 which I took out. Looking closer I noticed the Drivejoy had a rubber seal around it. I removed the seal and compared the filter size with the new one after removing its rubber seal. They were exactly the same size!  I put the old seal on the new filter and it works perfectly!!...<br />
<br />
<a href="http://minitrucktalk.com/threads/sambar-air-filter.28926/" class="internalLink">Sambar Air Filter</a>]]></content:encoded>
    </item>
    <item>
      <title>6th Gen Sambar TT2 - Tach Installation question</title>
      <pubDate>Tue, 02 Jun 2026 19:56:52 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/6th-gen-sambar-tt2-tach-installation-question.28908/</link>
      <guid>http://minitrucktalk.com/threads/6th-gen-sambar-tt2-tach-installation-question.28908/</guid>
      <author>invalid@example.com (Ted Diehl)</author>
      <dc:creator>Ted Diehl</dc:creator>
      <content:encoded><![CDATA[This is a connector to the left of my steering wheel and behind the small storage box in the dash which I removed for the installation.  I checked the voltage on this yellow wire and got 14 volts with the key on.  Is this the coil &quot;source&quot; wire that I connect the tach&#039;s green wire to????...<br />
<br />
<a href="http://minitrucktalk.com/threads/6th-gen-sambar-tt2-tach-installation-question.28908/" class="internalLink">6th Gen Sambar TT2 - Tach Installation question</a>]]></content:encoded>
    </item>
    <item>
      <title>Tach Install on '99 Sambar - need pictures/wiring Diagram</title>
      <pubDate>Tue, 26 May 2026 17:33:04 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/tach-install-on-99-sambar-need-pictures-wiring-diagram.28902/</link>
      <guid>http://minitrucktalk.com/threads/tach-install-on-99-sambar-need-pictures-wiring-diagram.28902/</guid>
      <author>invalid@example.com (Ted Diehl)</author>
      <dc:creator>Ted Diehl</dc:creator>
      <content:encoded><![CDATA[I&#039;ve got the two storage cubbies removed from the lower dash on the left and right of the Steering.  I only see a Yellow with red strip but no solid yellow; at least the color yellow as I know it.  I can&#039;t see a solid yellow wire.  Can someone who has done a tach install in a 6th Gen Sambar please look at the picture and mark which is the tach source wire....<br />
<br />
<a href="http://minitrucktalk.com/threads/tach-install-on-99-sambar-need-pictures-wiring-diagram.28902/" class="internalLink">Tach Install on &#039;99 Sambar - need pictures/wiring Diagram</a>]]></content:encoded>
    </item>
    <item>
      <title>Sambar ecvt powder clutch how much?</title>
      <pubDate>Sun, 24 May 2026 15:33:14 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/sambar-ecvt-powder-clutch-how-much.28352/</link>
      <guid>http://minitrucktalk.com/threads/sambar-ecvt-powder-clutch-how-much.28352/</guid>
      <author>invalid@example.com (JP’s sambar)</author>
      <dc:creator>JP’s sambar</dc:creator>
      <content:encoded><![CDATA[I have a 1997 sambar van with a worn out ecvt.   I have found a source  for the powder I think might work.<br />
<br />
just need to know how much powder to use<br />
<br />
any educated guesses are welcome. Need to start somewhere<br />
<br />
thanks!]]></content:encoded>
      <slash:comments>1</slash:comments>
    </item>
    <item>
      <title>Sambar Oil Cooler?</title>
      <pubDate>Thu, 21 May 2026 06:52:44 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/sambar-oil-cooler.28888/</link>
      <guid>http://minitrucktalk.com/threads/sambar-oil-cooler.28888/</guid>
      <author>invalid@example.com (Gwelo)</author>
      <dc:creator>Gwelo</dc:creator>
      <content:encoded><![CDATA[Went to change the oil for the first time on my new to me 1999 Sambar truck yesterday. Put it up on ramps in the rear and got the drain plug out and oil draining. The filter looked like it had been there for a while and was going to be a pita to remove, which turned out to be true, due to lack of space. The oil filter base looked really weird also, like a big donut. Looking closer I see 2 hoses attached to the donut…wth… did someone add an oil cooler? <img src="styles/default/xenforo/clear.png" class="mceSmilieSprite mceSmilie1" alt=":)" title="Smile    :)" /><br />
<br />
First things first, I need to get...<br />
<br />
<a href="http://minitrucktalk.com/threads/sambar-oil-cooler.28888/" class="internalLink">Sambar Oil Cooler?</a>]]></content:encoded>
      <slash:comments>9</slash:comments>
    </item>
    <item>
      <title>Gear Ratios ?</title>
      <pubDate>Wed, 13 May 2026 20:08:05 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/gear-ratios.28447/</link>
      <guid>http://minitrucktalk.com/threads/gear-ratios.28447/</guid>
      <author>invalid@example.com (Gwelo)</author>
      <dc:creator>Gwelo</dc:creator>
      <content:encoded><![CDATA[Hello All!<br />
I am on the Kona side of the big island of Hawaii. I found a 1999 Sambar for sale on Marketplace last Dec which I bought. It has right at 31K miles. Thought I&#039;d check in and introduce myself.<br />
<br />
The Sambar came with full time AWD, supercharger, power steering and 3 speed auto trans.<br />
Does anyone know what the gear ratios are for the rear end and trans?<br />
<br />
I have ordered a set of 14x5.5&quot;, 4x100 RTX wheels with 38mm offset and a set of 175 65R14 tires. They are due in a week or so. The...<br />
<br />
<a href="http://minitrucktalk.com/threads/gear-ratios.28447/" class="internalLink">Gear Ratios ?</a>]]></content:encoded>
      <slash:comments>12</slash:comments>
    </item>
    <item>
      <title>Here it is folks - Customized OEM Sambar Steering Wheel</title>
      <pubDate>Fri, 08 May 2026 09:37:25 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/here-it-is-folks-customized-oem-sambar-steering-wheel.28881/</link>
      <guid>http://minitrucktalk.com/threads/here-it-is-folks-customized-oem-sambar-steering-wheel.28881/</guid>
      <author>invalid@example.com (Ted Diehl)</author>
      <dc:creator>Ted Diehl</dc:creator>
      <content:encoded><![CDATA[<img src="https://preview.redd.it/customized-oem-subaru-steering-wheel-sambar-tt2-v0-i2jmvr7ocyxg1.png?width=4284&amp;format=png&amp;auto=webp&amp;s=b78543c72d8a6e33f15cfd1c055b138570cf3b05" class="bbCodeImage LbImage" alt="[&#x200B;IMG]" data-url="https://preview.redd.it/customized-oem-subaru-steering-wheel-sambar-tt2-v0-i2jmvr7ocyxg1.png?width=4284&amp;format=png&amp;auto=webp&amp;s=b78543c72d8a6e33f15cfd1c055b138570cf3b05" />]]></content:encoded>
      <slash:comments>7</slash:comments>
    </item>
    <item>
      <title>New Wheels and Tires!</title>
      <pubDate>Sat, 02 May 2026 17:52:36 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/new-wheels-and-tires.28458/</link>
      <guid>http://minitrucktalk.com/threads/new-wheels-and-tires.28458/</guid>
      <author>invalid@example.com (Gwelo)</author>
      <dc:creator>Gwelo</dc:creator>
      <content:encoded><![CDATA[I finally got the new wheels yesterday!! These are RTX Spark 14x5.5 4x100 with +38 offset.  Tires are Lexani 175/65R14.  Took them to Costco to mount and balance and installed them today at home. So far no rubbing or strange noises. Whew, what a relief, I had a pretty good idea they would it but really glad they do! Very happy with the look!<br />
<br />


	<a href="https://minitrucktalk.com/attachments/24719/" target="_blank">View attachment 24719</a>]]></content:encoded>
      <slash:comments>5</slash:comments>
    </item>
    <item>
      <title>Dash Temp and Gas Gauges don't work along with turn signals.</title>
      <pubDate>Tue, 21 Apr 2026 20:07:03 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/dash-temp-and-gas-gauges-dont-work-along-with-turn-signals.28463/</link>
      <guid>http://minitrucktalk.com/threads/dash-temp-and-gas-gauges-dont-work-along-with-turn-signals.28463/</guid>
      <author>invalid@example.com (machew671)</author>
      <dc:creator>machew671</dc:creator>
      <content:encoded><![CDATA[Issue is Dash gauges stopped working, specifically Gas and temp gauges, then turn signals don&#039;t work BUT Hazards work. Initially tt popped #3 Fuse I changed it and it worked after that, now it&#039;s not working again, BUT #3 fuse isn&#039;t popped. <br />
<br />
I have done the usual searches everything leads to cleaning column contacts for turn signals BUT will cleaning those contact fix the temps and gas level gauge issue?<br />
<br />
TIA]]></content:encoded>
      <slash:comments>1</slash:comments>
    </item>
    <item>
      <title>Problem taking fuel, inaccurate fuel gauge?</title>
      <pubDate>Tue, 21 Apr 2026 19:50:06 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/problem-taking-fuel-inaccurate-fuel-gauge.28484/</link>
      <guid>http://minitrucktalk.com/threads/problem-taking-fuel-inaccurate-fuel-gauge.28484/</guid>
      <author>invalid@example.com (RatinLoot)</author>
      <dc:creator>RatinLoot</dc:creator>
      <content:encoded><![CDATA[Hi all, I have a 1992 Subaru Sambar van (KV3) and I&#039;m troubleshooting what I suspect are two related fuel system issues.<br />
<br />
First, the fuel gauge started bouncing between empty and half. It often sits near empty but occasionally jumps up while driving.<br />
<br />
Second, lately when I try to fill the tank, the fuel backs up almost immediately as if it&#039;s full, but then slowly goes down over the next 30 seconds or so.<br />
I don&#039;t actually have any idea how much fuel is in the tank anymore.<br />
<br />
My working theory...<br />
<br />
<a href="http://minitrucktalk.com/threads/problem-taking-fuel-inaccurate-fuel-gauge.28484/" class="internalLink">Problem taking fuel, inaccurate fuel gauge?</a>]]></content:encoded>
      <slash:comments>1</slash:comments>
    </item>
    <item>
      <title>Decoding Sambar Vin Number</title>
      <pubDate>Tue, 21 Apr 2026 19:46:22 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/decoding-sambar-vin-number.21314/</link>
      <guid>http://minitrucktalk.com/threads/decoding-sambar-vin-number.21314/</guid>
      <author>invalid@example.com (fumbimo)</author>
      <dc:creator>fumbimo</dc:creator>
      <content:encoded><![CDATA[Hi everyone, my first kei truck is on the way! its a KS4 Sambar, <br />
<br />
the VIN or model info number is KS4F32N, I&#039;m looking at the service manual page for decoding the VIN and there isn&#039;t an option for the F in that position, can anybody tell me what it means?]]></content:encoded>
      <slash:comments>7</slash:comments>
    </item>
    <item>
      <title>Sambar Bad ECU</title>
      <pubDate>Sat, 11 Apr 2026 13:39:24 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/sambar-bad-ecu.28451/</link>
      <guid>http://minitrucktalk.com/threads/sambar-bad-ecu.28451/</guid>
      <author>invalid@example.com (Spoceps)</author>
      <dc:creator>Spoceps</dc:creator>
      <content:encoded><![CDATA[The ECU on my 99 TT2 Sambar shit the bed.  They&#039;re not too expensive to get a replacement.  I&#039;m assuming since it&#039;s fairly simple I can just get another ECU that&#039;s for the TT2 and manual transmission and it should work, but don&#039;t see much information about it.  So is this possible and if it is does it need to be a 99 or can I do up to a 2006/7 since they use the same type?  Or would it be worth the effort of going Megasquirt or Speeduino to help future proof it]]></content:encoded>
      <slash:comments>8</slash:comments>
    </item>
    <item>
      <title>'99 Sambar TT2 OEM Steering Wheel being customized</title>
      <pubDate>Fri, 10 Apr 2026 16:09:24 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/99-sambar-tt2-oem-steering-wheel-being-customized.28480/</link>
      <guid>http://minitrucktalk.com/threads/99-sambar-tt2-oem-steering-wheel-being-customized.28480/</guid>
      <author>invalid@example.com (Ted Diehl)</author>
      <dc:creator>Ted Diehl</dc:creator>
      <content:encoded><![CDATA[<img src="https://scontent-phx1-1.xx.fbcdn.net/v/t39.30808-6/669882095_10237910713899822_3033167744221309361_n.jpg?stp=cp6_dst-jpg_tt6&amp;_nc_cat=103&amp;ccb=1-7&amp;_nc_sid=e06c5d&amp;_nc_ohc=IhkQfy6KysoQ7kNvwEunGjx&amp;_nc_oc=AdoJJ93l1-OLeTqDPaoAqA9oZ7B84OesV8WvAyyi_kcShR59vA5XdRQ23Se1nrWA6Eo&amp;_nc_zt=23&amp;_nc_ht=scontent-phx1-1.xx&amp;_nc_gid=e7PqxUWhkEUu1VlAxuqaqQ&amp;_nc_ss=7a3a8&amp;oh=00_Af2LNMQ4wGb6Sa9LtNhLYinMl5nJlwGU9bUEe3VuBSWQDA&amp;oe=69DEE30B" class="bbCodeImage LbImage" alt="[&#x200B;IMG]" data-url="https://scontent-phx1-1.xx.fbcdn.net/v/t39.30808-6/669882095_10237910713899822_3033167744221309361_n.jpg?stp=cp6_dst-jpg_tt6&amp;_nc_cat=103&amp;ccb=1-7&amp;_nc_sid=e06c5d&amp;_nc_ohc=IhkQfy6KysoQ7kNvwEunGjx&amp;_nc_oc=AdoJJ93l1-OLeTqDPaoAqA9oZ7B84OesV8WvAyyi_kcShR59vA5XdRQ23Se1nrWA6Eo&amp;_nc_zt=23&amp;_nc_ht=scontent-phx1-1.xx&amp;_nc_gid=e7PqxUWhkEUu1VlAxuqaqQ&amp;_nc_ss=7a3a8&amp;oh=00_Af2LNMQ4wGb6Sa9LtNhLYinMl5nJlwGU9bUEe3VuBSWQDA&amp;oe=69DEE30B" />]]></content:encoded>
    </item>
    <item>
      <title>Special Keiz Exhaust &amp; Carb Tuning for it</title>
      <pubDate>Wed, 08 Apr 2026 05:12:19 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/special-keiz-exhaust-carb-tuning-for-it.28380/</link>
      <guid>http://minitrucktalk.com/threads/special-keiz-exhaust-carb-tuning-for-it.28380/</guid>
      <author>invalid@example.com (Dr_Bunsen)</author>
      <dc:creator>Dr_Bunsen</dc:creator>
      <content:encoded><![CDATA[Recently fitted a Special Keiz Exhaust, sourced via Oh Kei Garage. Very pleased with how it looks and sounds. Even though it has the quiet loop it&#039;s fairly rowdy <img src="styles/default/xenforo/clear.png" class="mceSmilieSprite mceSmilie2" alt=";)" title="Wink    ;)" /><br />
<br />
I found it popped quite a bit on deceleration compared to the stock exhaust probably due to the lower back pressure, so I re-tuned the carb, made quite a difference, performance feels better and few if any pops. FYI I made some notes of how I tuned the carb in case it helps. I have an old school vacuum gauge which plugs into...<br />
<br />
<a href="http://minitrucktalk.com/threads/special-keiz-exhaust-carb-tuning-for-it.28380/" class="internalLink">Special Keiz Exhaust &amp; Carb Tuning for it</a>]]></content:encoded>
      <slash:comments>5</slash:comments>
    </item>
    <item>
      <title>2004 Sambar Tach Install</title>
      <pubDate>Tue, 07 Apr 2026 21:45:18 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/2004-sambar-tach-install.28475/</link>
      <guid>http://minitrucktalk.com/threads/2004-sambar-tach-install.28475/</guid>
      <author>invalid@example.com (SDL)</author>
      <dc:creator>SDL</dc:creator>
      <content:encoded><![CDATA[<a href="https://minitrucktalk.com/attachments/24761/" target="_blank">View attachment 24761</a>
	
 

	<a href="https://minitrucktalk.com/attachments/24762/" target="_blank">View attachment 24762</a>
	
 First post.  There’s lots of info online about installing a tach in earlier versions of the Sambar but very little for the TT2.  There’s also a Reddit thread about locating a black connector in a 2007.  There is no black connector in my 2004.  However after removing the cubby to the left of the steering wheel, and after removing some electrical tape from a white connector I located a solid yellow wire.  Testing with key on reads 12v,...<br />
<br />
<a href="http://minitrucktalk.com/threads/2004-sambar-tach-install.28475/" class="internalLink">2004 Sambar Tach Install</a>]]></content:encoded>
    </item>
    <item>
      <title>Rain Water on Front Floor of 1999 TV2 Van</title>
      <pubDate>Mon, 30 Mar 2026 23:37:36 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/rain-water-on-front-floor-of-1999-tv2-van.28459/</link>
      <guid>http://minitrucktalk.com/threads/rain-water-on-front-floor-of-1999-tv2-van.28459/</guid>
      <author>invalid@example.com (dgame)</author>
      <dc:creator>dgame</dc:creator>
      <content:encoded><![CDATA[Hi,<br />
<br />
I just got a 1999 TV2 van and there is water on the front floor on both sides after it rains. <br />
<br />
I am gong to do a water hose test. <br />
<br />
How should I approach this? <br />
<br />
Are there any drain holes that could be clogged?<br />
<br />
Should the covers behind the headlights be water tight? They are not.<br />
<br />
Thank you!]]></content:encoded>
      <slash:comments>4</slash:comments>
    </item>
    <item>
      <title>98 Sambar KS4 EN07C Starts Fine Cold, Has Hot Start Issues</title>
      <pubDate>Wed, 25 Mar 2026 17:07:15 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/98-sambar-ks4-en07c-starts-fine-cold-has-hot-start-issues.28448/</link>
      <guid>http://minitrucktalk.com/threads/98-sambar-ks4-en07c-starts-fine-cold-has-hot-start-issues.28448/</guid>
      <author>invalid@example.com (Robgantt)</author>
      <dc:creator>Robgantt</dc:creator>
      <content:encoded><![CDATA[Hi, My 98 sambar ks4 with the EN07C, Carbureted engine has developed a problem with hot starts.<br />
I have had it for a year and used it on and off as daily driver.  When I got it, I changed spark plugs NGK Iridium, wires (NGK) OEM distributor and rotor, fuel filter, air filter, oil change and filter, front differential,  transmission fluid. Ran cans of Seafoam through it and have run decent gas in it.  I have had the problem of having to wait until it warms up a bit (5 minutes) to keep it from...<br />
<br />
<a href="http://minitrucktalk.com/threads/98-sambar-ks4-en07c-starts-fine-cold-has-hot-start-issues.28448/" class="internalLink">98 Sambar KS4 EN07C Starts Fine Cold, Has Hot Start Issues</a>]]></content:encoded>
      <slash:comments>5</slash:comments>
    </item>
    <item>
      <title>Sambar TC ?</title>
      <pubDate>Tue, 24 Mar 2026 10:54:07 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/sambar-tc.28452/</link>
      <guid>http://minitrucktalk.com/threads/sambar-tc.28452/</guid>
      <author>invalid@example.com (Gwelo)</author>
      <dc:creator>Gwelo</dc:creator>
      <content:encoded><![CDATA[I’ve owned my Sambar for almost 3 months and never noticed this .<br />
Any idea what the TC means?  Also just noticed how dirty it is, but hey, it’s been raining ☔️ <br />
<br />
 

	<a href="https://minitrucktalk.com/attachments/24718/" target="_blank">View attachment 24718</a>]]></content:encoded>
      <slash:comments>1</slash:comments>
    </item>
    <item>
      <title>Window Cranks and door Pulls</title>
      <pubDate>Mon, 23 Mar 2026 17:12:44 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/window-cranks-and-door-pulls.28439/</link>
      <guid>http://minitrucktalk.com/threads/window-cranks-and-door-pulls.28439/</guid>
      <author>invalid@example.com (Ted Diehl)</author>
      <dc:creator>Ted Diehl</dc:creator>
      <content:encoded><![CDATA[Anyone know if the window cranks for a 5th Gen Sambar will slip on the splined window crank thingy sticking out of the door card on a 6th (TT2)) Sambar?]]></content:encoded>
      <slash:comments>1</slash:comments>
    </item>
    <item>
      <title>Translation ?</title>
      <pubDate>Mon, 23 Mar 2026 02:30:21 +0000</pubDate>
      <link>http://minitrucktalk.com/threads/translation.28449/</link>
      <guid>http://minitrucktalk.com/threads/translation.28449/</guid>
      <author>invalid@example.com (Gwelo)</author>
      <dc:creator>Gwelo</dc:creator>
      <content:encoded><![CDATA[Can anyone translate this for me? I can&#039;t figure out how to make Google Translate work.<br />
What maintenance was done? This sticker is on the side of the dash under the brake fluid door.<br />


	<a href="https://minitrucktalk.com/attachments/24713/" target="_blank">View attachment 24713</a>]]></content:encoded>
      <slash:comments>6</slash:comments>
    </item>
  </channel>
</rss>
