Hello, My supercharger oil level has been dropping, now it is below the dipstick. I’ve heard these superchargers (Aisin AMR300) tend to push oil out of the seals. The bottom of the charger is gunky/oily. So my options are to keep adding oil periodically or rebuild/replace the seals. My question is, has anyone rebuilt or replaced seals on these Sambar superchargers? I can’t seem to find any information about replacement or anywhere to buy new seals. (I have seen rebuild information for the larger AMR500 models but not the AMR300) thanks!
Are they paper or silicone seals? If paper you can buy that in assorted sheets (different thickness) and use the old gasket as a templet to cut using an X-acto knife.
