Fix after lifting truck 3".Got 2 14mm1.5,grade 8 bolts,should have gotten grade 5 threads better.cut of head and turned 2" down to 1/2".threaded it with 1/2" x20 threads.Drilled out the steering arm.work out great.On my truck the driverside had the LH treaded joint on top but the pass. side had the LH threaded on thr bottom so I changed the pass side.Got 2 1/2" by 1/2" RH threaded female helm joints, 4 cone spacers. Did have to bore the bottom of the steering arm alittle to put a bushing in so the bolt was tight.