1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wheel alignment numbers?

Discussion in 'Mitsubishi Minicab References' started by Coast Steve, Oct 20, 2009.

  1. Coast Steve

    Coast Steve Member

    Hi Guys,

    I think our van needs a front wheel alignment.

    It looks to me the toe out is to much, does anyone have this info for a 91 U42V Bravo van?


    Thanks again, Steve
     
  2. slimbad

    slimbad Member

    Toe-in specs and alignment

    Steve,

    Don't no the exact specs for your van. Here are some toe-in specs for some of the other kei-trucks:

    Mitsubishi....2-7mm

    Daihatsu.....1.5-4.8mm

    Suzuki........2-4mm

    Subaru.......1-3mm

    If you set yours at 2.5-3mm that "should" get you in the ballpark.

    Here's a couple of threads on this subj that may be helpful:

    http://www.minitrucktalk.com/showthread.php?t=2311

    http://www.minitrucktalk.com/showthread.php?t=3092

    As for the caster/camber specs, I could get them however for the Mits, Daihatsu and Suzuki (and possibly the rest) they're not adjustable...........later, slim
     
  3. Coast Steve

    Coast Steve Member

    Slim to the rescue again

    Thanks Slim!

    Will do,


    Steve
     
  4. Coast Steve

    Coast Steve Member

    update

    So I had the van wheels alignment done today and it was just like I thought, It was WAY out!

    What a difference !

    , they said it had a toe out about 7/33" now it's toe in about 1/16"
    Drives way better now too.

    They used a brand new system to check it and it looked impresive about $30,000 impresive.


    $85 well spent.


    Steve
     
  5. slimbad

    slimbad Member

    Steve,

    Glad to hear you're straightened "IN", now when you get your Jeggs 10-250's on you should be good to go............later, slim
     

Share This Page