1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Suzuki Carry Lift kit issues

Discussion in 'Suzuki Carry' started by aallen44, Feb 4, 2018.

  1. aallen44

    aallen44 New Member

    I recently bought a 2" lift kit for the carry and installed it this weekend. Although there was a problem with it. The rear wheels looks fantastic and everything back there turned out awesome. The front wheels as are inverted to the inside. The bottom part of the wheels are turned in.

    The passenger side of the CV joint is knocking and is strained, the control arm looks strained as well. Would bigger tires help at all. Right now I have 145/13. Any ideas on how to fix this problem or cheap fixes.

    Pictures below
     
  2. SAITCHO

    SAITCHO Active Member

    On many kits the strut spacers hole is offset to give a better camber, so make sure they are installed correctly.
     
  3. Cole

    Cole Member

    There definitely isn't a cheap fix. Tires won't help. If your camber is off that bad with your tires out at the top then check to make sure your spacers are installed correctly like saitcho said. You will need to bring the top of the struts in to correct it.
     

Share This Page