I have a 1993 Suzuki Carry with F6A engine. I have an oil leak at the pan. I was going to remove the pan but noticed there may be some hidden bolts at the rear that are inside the bell housing, so I stopped. Anyone remove the oil Pan, and did you have to do anything special (remove bell housing or other components)?
had to take my off the new reman engine to put on the turbo drain line on. they used some powerful stuff ( hammer and screwdriver time) had to twist it around the oil pickup tube. there is a windage tray inside slot to get it around screen on pickup. if still installed in truck you probably have to take off crossmember ( engine mount one) if so block engine up real good before moving it . they are some bolts up by fly wheel 4 on my pan.
Remove the crossmember and the bottom inspection plate on trans to find the 2 bolts hidden. Doing mine right now