1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Subaru sambar tach help!!!!!!

Discussion in 'Subaru Sambar' started by Brayden, Sep 17, 2017.

  1. Brayden

    Brayden New Member

    New to the subaru sambar world and wanting to put a tach into the truck. Tried splicing into some wires but having no luck getting the gauge to read. I got red to power, black to ground, but green goes where?? Help.!!!!
     
  2. Maximal

    Maximal Member

    Green signal wire goes to the yellow coil negative wire, it's in the main wiring harness coming from the middle front of the truck or you can run the green wire to the coil itself at the very back of the truck and tap it into the yellow wire there. If you still need a picture lmk
     

Share This Page