hi, I need to know where I can buy a timing belt and tie rod ends would be a nice addition too! The other timing belt numbers are13514-87201, vin is s80lp-trk jda000s800030115 thanks tom
he bought 2 from me and cut one down with a razor knife only diff was the width and i think new they are over 120 i sold him 2 for less than that so he might still have an extra
Look at both cam and crank, should be line up marks on both. Line up the marks and install belt. They might be off a tad to get gelt on but when you tighten up the tenion pulley the mark will line up perfect if you have the right bely.
Sorry about the miss spelling but I am sitting in a deer blind In the Texas Hill Country using my stink IPhone And my fingers are to fat or the letters or to small and on top of that I left reading glasses inn The truck. It's hell getting old. You young bucks can giggle but one day you will say Hell I can't see.
Wish I wrote timing belt number down I put rebuilt engine in my hi jet and timing belt they sent was wide and mine was narrow. A friend of mine had a spare timing belt that was a gates belt I believe, cost less than 20 bucks and worked perfectly, been running 2 years with no problems butt now can't find the number!
Wish I wrote timing belt number down I put rebuilt engine in my hi jet and timing belt they sent was wide and mine was narrow. A friend of mine had a spare timing belt that was a gates belt I believe, cost less than 20 bucks and worked perfectly, been running 2 years with no problems butt now can't find the number!
if you still have the wide one just use a razor blade to make it thinner, is real easy. Put it inside the old one and trace a line with ball pen, cut line and ur done, 5 min.
