lower ball joints are heavily worn

1991 hijet jumbo.

Hi all. While replacing the wheel bearings and installing the lift I discovered that my lower ball joints are heavily worn. left hand side actually had water inside and when I flexed the spindle to get it off some rusty water actually shot out. I can find the tie rod ends but I'm not having much luck with the ball joints. It appears they aren't serviceable.

 

Ya have to get the lower control arm I thought

 

Had that issue with my Acty also. Found ball joint for Polaris Ranger was an exact fit. And only about $15.

 

Did you press the old ones out? what year and model polaris ranger?

 

Friend of mine is a welder and had to grind weld off original and weld in new one. I’ll see if I can find the part number. Pretty sure it was a mid 90’s Polaris Ranger. Exact match. It was my left side that was bad too. I do have a spare right side control arm if anyone needs one.

 

Crap, not a press out then. That sucks

 

Is the control arm new? I live in Titusville, so not far from you. How much for the control arm, please?

 

G&R Imports

 

I'm looking for the same thing. Lower ball joints for an s83p. One is a little bit worn but I plan to just do them both if I can find them. I don't believe in having to replace the entire control arm. I feel like that's silly. I know at the same time I also want to do my bushings because they are not great either