1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Finally a bolt on lift over 3" for older model suzuki's

Discussion in 'Suzuki Carry' started by masspilot2004, Sep 18, 2011.

  1. masspilot2004

    masspilot2004 Member

    Hello there all,

    Well Like I said in an older post of mine a myself and a friend finally did it, we developed a fully bolt on lift kit that solves all the articulation and camber angels for your older suzuki. It took a little bit to design it and then test it but it works. I will be taking some pics of the kit real soon to show you all. We are developing a web site to start selling these kits but if you have any questions feel free to contact me I will pm you my number for questions. I would like to thank the various members for there help and input and designs to make this happen. NOw you can fit larger tires with no trimming or cv problems.

    Steve
     
  2. woodhe1

    woodhe1 Member

    lift

    looking forward to seeing it!!!!

    dan
     
  3. Ironraven

    Ironraven Active Member

    Sounds promising, I also look forward to seeing the results! :)
     
  4. TRAX and HORNS

    TRAX and HORNS Well-Known Member

    Dittooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
    Keep us in the loop please.
     
  5. goldstar

    goldstar Member

    Lift kit

    I am interested in one of your kits. Is it available yet?:pop:
     
  6. masspilot2004

    masspilot2004 Member

    Hey guys the kit is almost available we are still running it through all the road test and we are going to run it through a test early this winter. Understand We want it out there just as much as you all do. But I want to make sure that the kit is bullet proof. I do not want to be another builder that promises it all and delivers junk. I will let you all know as soon as it is available. Thanks Steve
     
  7. goldstar

    goldstar Member

    Lift kit

    Just want to make sure we're on the same page Steve and understand that if this is a good kit I am interested in purchasing several.
    You posted in September that the kit had already been tested and worked very well. Being as the kit is designed to lift the truck I'm not sure I understand the winter test.:)
     
  8. masspilot2004

    masspilot2004 Member

    I am putting this through every type of environment to make sure there is no deficiencies in the design and manufacturing of it. I will EXPRESS THIS AGAIN I do not want to have you all buy them and then have something happen where you all are saying the kit is crap like alot of them out there. PLs understand I want you all to be happy with the kit and have no problems. So I am taking all the precautions for you before you get them. I love these little trucks and they have become a passion of mine. So I want you all to be proud of what you have purchased from me. Steve
     
  9. BULLELK

    BULLELK New Member

    Show us some pictures!
     
  10. Gunrock0811

    Gunrock0811 New Member

    [​IMG]

    Can't wait for these..very much interested
     
  11. BULLELK

    BULLELK New Member

    Any updates
     
  12. farmboysdiesel

    farmboysdiesel New Member

    Very interested. Please keep us updated.
     
  13. kepow

    kepow Member

    now what????
     
  14. masspilot2004

    masspilot2004 Member

    hey there all

    Sorry have not gotten the pics up yet but I am currently on military orders and am not home to post them. As soon as I get back I will post them I promise
     
  15. Ran440

    Ran440 Member

    I'm going to make assumption that you are US military and say Thank You for your service. Hope you get home soon in one piece.
    God Bless America
     
  16. masspilot2004

    masspilot2004 Member

    Hey there all, I am finally back from my military obligations and I am going to be getting back on the lift project. Once I get settled in I will post the pics of the lift. Also I just recently acquired a set of mattracks for my carry. I am also looking into building the soft toppers again for these trucks if. I get a big enough response to the toppers I will research the cost again with the trim specialists. Well everyone have a great night and I will post soon. IT'S GOOD TO BE BACK
     
  17. Acerguy

    Acerguy Moderator Staff Member

    Glad to have you back!!
     
  18. masspilot2004

    masspilot2004 Member

    thanks Keith
     
  19. kepow

    kepow Member

    any new news?
     
  20. masspilot2004

    masspilot2004 Member

    well I am in the final stages I am testing it with the new mattracks I just installed. I will let you all know how it goes here in a few days. I am still getting re adjusted to being back from military obligations.
     
  21. kepow

    kepow Member

    Thanks masspilot...I will keep checking
     
  22. keithluneau

    keithluneau New Member

    I would definitely be interested in this, provided it's in my price range. ;) I've got about as much lift as I can safely run without binding the CV joints and would definitely like some more! Looking forward to some details when they're ready!
     
  23. masspilot2004

    masspilot2004 Member

    Hey every one we have completed all the off road test I can put my truck through. I took it out this past weekend with the mattracks on it and it performed perfectly. I will say that thanks to the help of certain members on here and there ideas for the kit. I could not have completed it with out them. I will start putting together the cost associated with the lift for every one who is interested. I will also post some pics of my truck now that I have completed the build. We will also be fabricating accessories for the trucks, bumpers, body armor and racks. Oh yeah also soft toppers for the trucks.
     
  24. TRAX and HORNS

    TRAX and HORNS Well-Known Member

    You have a picture of the lift? How tall is it?
     
  25. masspilot2004

    masspilot2004 Member

    The Lift nets about 4 inches over all and it performs great with both tires and tracks I will have some pics posted tomm
     
  26. vancouvermini

    vancouvermini New Member

    Very interested in your kit mate - waiting anxiously :)
     
  27. cityfederal

    cityfederal New Member

    Hey, I am very interested in a lift any time line?
     
  28. masspilot2004

    masspilot2004 Member

    photo.JPG photo.JPG
    Here is the latest view of the truck
     
  29. masspilot2004

    masspilot2004 Member

    photo-1.jpg Sorry for the pic being sideways it wont insert the right way for some reason
     
  30. TheSinkingGnome

    TheSinkingGnome New Member

    That Sir is a very nice setup!
     

Share This Page