Attached are two pictures of the fender flares I installed after replacing the stock 13" wheels and tires with 14". I needed the flares because the new wheel setup stuck out beyond the bodysides, causing mud, snow etc. to splash up onto the body. The rears I made out of one plastic utility trailer fender which I sliced in two lengthwise, trimmed, and mounted using two self tapping screws each. - I stole this idea from someone here on the forum, but couldn't find the post to thank him for the idea. - - The fronts, I ordered (from China I guess). The fronts I mounted using two #8 screws at the bottoms, and the rest using 1/4" 3M doubled sided tape, since I couldn't bring myself to drill any more holes in the body than absolutely necessary. - - We'll see how it works out.
