1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Does your Acty shake?

Discussion in 'Honda Acty' started by Borg, Jun 11, 2014.

  1. Borg

    Borg Member

    Check the front CV joints...

    Brief grab and shake says one of my front CV joints ate a bearing... you can also see the CV axle spins out of round when you spin the drive shaft.

    Anyone know the cheapest place to get a new one or am I better off trying to locate a place to rebuild it?

  2. Borg

    Borg Member

    For anyone in the future with front inner CV joint problems.

    If the races are OK, you can use needle bearings from a U-Joint, Car Quest part number 220-0028
  3. YearoftheDragon

    YearoftheDragon New Member

    When I got mine it shaked at 30-45mph, later found out it was a bent drive shaft. My guess it was a fork lift operator who didn't care.
  4. Borg

    Borg Member

    My CV axle spit out all the needle bearings... not sure how, my guess is someone didn't put it back together right.

    Just realized I didn't really elaborate on how I fixed it, and why it was shaking.

    But the U-Joint I bought had the same size needle bearings, so I just repacked the one bearing that lost all the needles on the inner joint, and all is well.

Share This Page