1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Delay wiper module hook up help..

Discussion in 'Suzuki Carry' started by 200trueblue, Aug 18, 2019.

  1. 200trueblue

    200trueblue Member

    7DC1D76B-AC4E-4C31-91B8-B731B1AC651F.jpeg 29845C5B-10EC-4BF5-81F7-265B672524D8.jpeg

    I purchased a delay wiper module online and need to know which
    wire to cut to make It work on my 2003 Carry ?

    Picture attached of module and the wiper motor
    Also these trucks are Common Positive correct ?

    Thanks
    Bill
     
    Last edited: Aug 21, 2019
  2. 200trueblue

    200trueblue Member

    Anyone ?

    Thanks
     
  3. fmartin_gila

    fmartin_gila Well-Known Member

    Suzuki vehicles are negative grounded. My perception after studying the wiring diagrams presented. You should use the negative common diagram. If you wire it in as to the upper diagram, you will cause a short and blow the fuse as soon as you try to test it as you will be feeding 12 v thru the add-on unit to ground and will probably burn up the delay unit as well.

    Please give close scrutiny to the diagrams and follow the current paths under different operating conditions so you will understand my reasoning. Sometimes it can get kind of tricky to follow where the current will flow under different operating conditions.

    At least get another set of eyes on those diagrams before you wire it as common positive.

    Fred
     

Share This Page