db52t v belt no a/c 1999 suzuki carry

I've been having an issue with belts is there somewhere in the US to buy the belt and does anyone have a number, for some reason I keep throwing the belt the alignment is excellent I tried 3/8 belts and they don't last very long, need some insight, has anyone went to different pulley size such as a standard 1/2 on all the items involved

 

Do you tighten the belts enough? These things run up to 7 rpm and if the belt is loose it can shorten its life, plus make noise too. Mine has a serpentine 4 rib but after running it for a few months I had to really tighten it up to get it to quiet down.

 

My hijet runs 10mm belts. I get them from napa and they are industrial. 3/8 is a little smaller idk if that would help or not...

 

thanks but yes good and tight

 

I knew they were 10 mm but couldn't seem to find any I will try napa thanks

 

Green industrial belt also gates belts come in metric sizes and available at napa

 

thanks I did order one online from napa, hopefully this takes care of everything

 

I hope so too! Best of luck!

 

Does anyone have the part number from napa