1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dashboard message. - smart stop F11

Discussion in 'Daihatsu Hi jet' started by Vaughan Luff, Aug 6, 2022.

  1. Vaughan Luff

    Vaughan Luff New Member

    I have a message on my dash in Japanese. Google translate said it translates to "Smart Stop"
    There is a code 11E

    Put F11
    in title that's mistake


    Anyone know what that relates to?

    Is it to do with ABS?

    I don't have a manual.
    It's a 2020 Diahatsu Hijet
     

    Attached Files:

    Last edited: Aug 7, 2022
  2. shogun

    shogun Active Member

    do you have smart assist III system on your car? It says smart assistance stopped. Maybe you have switched off Smart Assist or part of it. In the center console there are switches where you can switch on/off those functions.
    Read here in my thread when I bought the 2021 Hijet with Smart Assist https://minitrucktalk.com/threads/2021-hijet-line-up.20898/
    Collision avoidance support system "Smart Assist IIIt"
    ・ Collision avoidance support braking function (for vehicles and pedestrians)
    ・ Collision warning function (for vehicles and pedestrians)
    ・ Lane departure warning function,
    ・ False start suppression control function (forward) (AT vehicles only)
    -Preceding vehicle start notification function
    - LED headlights
    --------------------------------------------------
    Daihatsu: Smart Assist source: Daihatsu's press release and technical brochures
    Low-speed pre-collision braking system
    When the system detects an impending collision with another vehicle ahead, it applies emergency braking to decelerate to avoid collision or reduce damage of collision. It operates when a vehicle is traveling at about 4km/h to 30km/h and the laser radar detects another vehicle within 20 meters ahead.
    Pre-Collision Throttle Management
    When laser radar detects an obstacle within 4 meters ahead and the system judges that the driver has stepped on the accelerator pedal carelessly, the system restricts the engine power to prevent sudden starting.
    Rear Pre-Collision Throttle Management
    A sonar sensor is used to detect walls or other obstacles behind the vehicle. When the driver steps on the accelerator pedal in R range, the system restricts the engine power to prevent sudden starting.
    LED headlamps
    Automatic high beams with light sensor on the dash
    Lane Departure Alert

    316 pages for download Japanese language owners/user handbook 01999- B5220 for Hijet Truck with KF engine, the same one I got in printed form for my 2021 Hijet, search here https://www.daihatsu.co.jp/service/torisetu/index.htm
     
  3. shogun

    shogun Active Member

    got it, checked my Japanese Hijet manual 01999-B5220. That is Smart Assist IIIt warning, shown on pages 138.. and from page 175 , you apparently switched the Smart III OFF, then you get such a warning

    when ignition switch is switched on and the Smart Assist is temporarily switched off, you get that warning. Play a bit with the switches for smart assist till hopefully the light warning goes away.
    Try https://www.deepl.com/translator to read all and translate it.
    https://www.daihatsu.com/news/2016/20161130-2.pdf

    if you want to read engine fault codes in future, here we discussed that
    https://minitrucktalk.com/threads/obd-2.22017/#post-127605
    https://minitrucktalk.com/threads/diagnostic-connector-location.21031/#post-121422
     
    Last edited: Aug 8, 2022

Share This Page