This post is to show you how to swap an original Mini Truck carburetor to a motorcycle one. This truck is a Kia Towner (Asia Towner) same as a Daihatsu HIJET. All the parts are the same but some small stuffs like front lights and the dashboard. I was having this issue since I got the truck and finally got it solved, no more vacuum lines just the two going to the ignition and one going to the engine oil cap. I installed the ckoke the shifter, haven't use it yet since I live in south Florida and it is always warm in here except in January and February. I hope I can help someone with this post. Here are all the parts I used: Caburetor Motorcycle 250cc NIBBI clone https://a.co/d/eNHAygz Choke Cable https://a.co/d/4iJoteV WIX Filter https://a.co/d/f7RHX97 Flange https://www.ebay.com/itm/1444671853...KuXgxu1SXu&var=&widget_ver=artemis&media=COPY 20 Pieces Carburetor Main Jet Kit https://a.co/d/dnzupsD Bike Shifter Cable Housing https://a.co/d/4zYMxSc Dorman 03336 https://a.co/d/4vSqjDO Installation video