Ok guys and gals just rebuilt the 3g83 in my 92 mini truck installed and all connected and I cleaned the carb out best as I could and used the local kit posted by another member but after install and trying to start I find the only way to start when cold is a really small spritz of starting fluid then it will run and I can shut it off and restart throughout the day but after sitting overnight it goes back to not start. When it runs it runs great, even idle no bogging anywhere plenty of power up hill anf through all 4 gears. I previously had to replace the fuel pump prior to engine rebuild, used a local source 2 wire elec pump with 4-7 psi. I am guessing there is something that I missed in the carb and was hoping that you all could give me some advice short of a new carb. Thanks in advance.
