1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1989-90 Minicab u15 Igniter Set?

Discussion in 'Mitsubishi Minicab' started by Andygerdts, Jan 3, 2017.

  1. Andygerdts

    Andygerdts New Member

    i just bought two mini cabs
    Left hand drives 3g81 engines from a local golf course. The small engine guy that sold me them, said they needed the Igniter Set For the Distributor.
    I can't find any info on it as for testing or replacing? One runs
    but very poor.
    Gave me a toro 92-2108 part number.
    Thanks for any help
     

    Attached Files:

  2. Crespo

    Crespo New Member

    I have a 3g81 left hand as well and need to rebuild the distriburtor also how can I do it and what part number are they
     
  3. Andygerdts

    Andygerdts New Member

    I justed replace mine from eBay part mitsubuishi j152. Cheap and works great.
     
  4. Crespo

    Crespo New Member

    That's great thank you so much for info
     
  5. Crespo

    Crespo New Member

    I took a look at that part it doesn't look like the same one that I have will it still be ok
     
  6. Andygerdts

    Andygerdts New Member

    There are two types of j152 just make sure picture matches what you have.
     
  7. Crespo

    Crespo New Member

    None look like the one I have
     
  8. Andygerdts

    Andygerdts New Member

    You most likely then have j909.
     
  9. Rick Bateman

    Rick Bateman New Member

    Hey guys, new to site, but have seen some great info on here. I am putting a 3g81 engine in a 42, has anyone changed their distributor to fit 42 or changed the internals to so wires will clip on 42 harness? any help would be appreciated
     
  10. 3banger

    3banger Member

    If you every have problems with a weird ignition that has ignitor problems just tear out the ignitor, take the two wires from the pickup (that used to go to ignitor) and run them to an MSD 6. You'll get way better spark, more reliable, cheap!, and easy to find in N. America.
     
  11. Rick Bateman

    Rick Bateman New Member

    Anybody ever put a 3G81 in a 42, what issues did you have?
     
  12. Rick Bateman

    Rick Bateman New Member

    THank you. been a little challenging on several things.
     

Share This Page