I know the drill! (ie: Been busy with other things).
Good find on that wiring diagram and translation. So per that diagram, the Air Vent Cut Solenoid is being fed through the ignition switch, then...
Pass1over, 1). The key is, where is the yellow/white wire (black/green wire to the Air Vent Cut Solenoid) sourced from? 2). Since the air-con is...
Shogun, good to hear your comments, thanks. That manual you referred to is the Danko which we have. The other owners manual document I did not...
If I understand correctly: 1). Low voltage at Air Vent Cut Solenoid pig tail. That is low voltage with the Air Vent Cut Solenoid pig tail...
May have been black/white on feed side of mine. -- It seems that color of wire would be related to function. However, with an added option...
pass1over, I missed your last post: "I did find that the wire is only outputting around 10v. Since I'm getting voltage on the wire, it's probably...
I suspect that drawing may not tell the whole story. There may be other loads that are attached and not shown. My reason to first focus on the...
Pass1over, to your first point of Air Vent Cut Solenoid, I mis-read and had the two solenoids reversed. Your find is a game changer and may make...
Pass1over, while the problem is not solved, the wire colors you provided could potentially be valuable at some point. To build on the "known's":...
Per the Danko manual, the wiring is much simpler on n0n-air con and MT models. I am curious to know if cause is control/source (VSS) or wiring or...
pass1over, Carb box cover is missing on mine as well. Pinch was maybe 3" from the solenoid plug. Not ssure where. However, from what I could put...
pass1over, I gather you are referring to the "Air Vent Cut Solenoid Valve" wire routing. Check me if I am wrong on that. -- In my case there were...
shogun, I appreciate the info on translation. - I had experimented some with a browser translation extension . In addition to some videos not...
Shogun, it is still on my list to have a look for that second idle related screw mentioned in the video you posted above, just waiting for warmer...
Shogun, I will have a look for that adjustment the next time I have the engine access cover off. I don't remember seeing a plug. And per the Danko...
SOLVED: Upon warm up, the Acty engine won't rev, white smoke, then engine recovers. - I replaced the Solenoid, Air Vent Cut 16031-PZ3-000. Thus...
The email addresses I used for Yokohama Motors were info@yokohamamotors.com and Parts@yokohamamotors.com (per the Yokohama Motors web site). Am I...
Shogun, reading your referenced post, "not enough air upsetting the air fuel ratio" (caused by mechanical failure of the air vent cut-solenoid) is...
Update - Solved MAYBE: Acty Stumbles - Engine won't rev and white smoke then engine recovers: I replaced the Solenoid, Air Vent Cut 16031-PZ3-000...
Separate names with a comma.
