Did you try doing @ Olde Phart (remove the space between the @ and the name) ? He may not know you asked otherwise.
The smaller tube won't get in the way of doing service to things under that front panel as well. Nice work!
Welcome! To help us help you better add the make/model/year to your signature. Not sure about the tires but you would be wise to do as much...
PM - Preventive Maintenance. Replace all rubber hoses/lines etc. Full tuneup (plugs/wires/cap/rotor), Timing belt, water pump, and any seals for...
Limiter would be around 25 mph. You need to do PM on it. Probably bad hoses etc. Tune up as well.
Use vise grip on the bolts that are stuck and tap it with a hammer. You have to really squeeze it on tight, so tight you can barely get it on...
I see this when I google for it https://minitrucktalk.com/threads/speed-limiter.21511.
Sounds like its digital and not analog for a limiter.
Small correction up above to note that the front calipers get swapped as labeled from left to right so the bleeders are at the top.
Splain please.
Suzuki is the easiest to get parts. The Subaru is a non-interference engine but has known issues that can be addressed by a decent shadetree mechanic.
Actually, they should be exempt because of the federal law that allows importation at >25 years old. I guess states can do what they want however.
If you go to a 165/65x14 tire discount tire has a lot of selections https://www.discounttire.com/fitmentresult/tires/size/165-65-14
Its almost always something simple seems like. Good to hear it's running again. I wonder how it even got disconnected because on my van the coil...
This is Kei mini truck site, not an all japanese truck site. I doubt many can help you here. Good luck.
Thats high but may be ok, I would check to make sure you are getting spark and the compression is still good. Also check the timing too.
When a fuel pump dies sometimes it spews crud upline and into the carb. You may need to open up the carb and clean it out. Basically carb rebuild....
Compression should be around 180. You may need to adjust the valves. Also if you check compression dry it doesn't hurt to add some oil in the...
Bigger the better, I just know OEM 12in would not work. The wheels on my van are actually suzuki 13in wheels and they just clear the brakes from...
As long as you have 13in wheels the front brakes work great.
Separate names with a comma.