Just saw your post, how did you make out? What province are you in? 5x7 seal beams should pass as long as you can aim/adjust them.
Sorry Alzheimer's setting in, BeForward https://www.beforward.jp/ guess their price was BEYOND my reach ;)
Beyond has a new one but they want $92US for it and quoted me $89US for shipping. Call me cheap, but I am not going to spend $235 CDN for the...
This is the part #14958KA080 [IMG]
Final update, may help someone in the future. Turns out the problem was not the vacuum diaphragm on the carb but the vacuum control valve that is...
I believe it is a one way vacuum valve designed to hold pressure and the choke open. I tested mine and it appears to have had a leak, not sure if...
Thanks for sharing, just bought one.
I just installed a tach and was amazed at where the power curve is and how high they rev. my 98 has a carb and I run at 5500rpm at 100kph. My top...
Have you gotten an exact reading of the engine block heat? I would start by getting an infrared thermometer and get surface readings from block...
Carb will still need to be rebuilt, float bowl leaking, and it can't hurt. but problem is 95% solved. As mentioned in earlier posts, choke was not...
Have been playing with the carb (air/fuel) and am squeaking 95KPH out of her on a straight flat road. Still have that leak at the float bowl...
Need to replace the front right spring as I have a bit of a sag on drivers side (just over 1/2") not interested in raising ride height, want to...
I would agree with you, but I am getting desperate for a solution. Any cam problems should give me poor compression and if a value is staying open...
Patrick - Thank You, this may lead to a solution. Not sure what you mean by rivets and where they may be in relation to the cam shaft. Is the cam...
Perfect, Thank You, Did not know they were effective after the muffler. Will look into.
Did you install one on your truck, where did you mount it? From what I understand it should not be directly in the exhaust manifold but a bit down...
I was really hoping this would be my last post on this and I could post SOLVED and maybe help some other poor sole. No such Luck.... Replaced...
I would start by looking at the idle setting when engine is hot, have mine set at around 850rpm when hot, seems to work great.
Good points, I am getting full throttle travel {no adjustment at peddle) but I did change the air filter with a cross referenced filter, maybe I...
Thanks for the ideas, I will check all the fuel and vent lines for the tank and look for any blockage, extra filters or?? Question on your...
Separate names with a comma.
