Please deletep
Thanks for the explanation. I noticed the wiring only has 2 wires, and the sambar has 3 wires. Google this issue and it shows simply leaving the...
Thanks for all the advice. Right now, the truck starts and drives fine. No power loss or hiccups. It gives out a moderate white smoke/steamy...
I read somewhere minitrucks' fuel pump has a relay/switch to control fuel output. The modern one that lacks that feature would choke the engine....
Is there any generic fuel pump i can replace on my carb 93 sambar? Thanks.
Anyone used these products to alleviate the need to completely tear down and replace head gasket? I am afraid to tear everything up. Thanks.
Oil on dipstick look dark, like any older vehicles:) coolant level has been average, i did lose some when i took the carb out and noticed one of...
I actually just replaced the MC, but i will check...
So my sambar had been spitting white smoke since last fall. It isn’t pouring out a smoke screen but it is more white smoke than normal. It doesn’t...
I ended up putting in NGK BKR5E, after referencing some older posts here. Truck runs smoother now.
I have a 91 Sambar ks3/4, carb. It was running rough on idle, and i want to replace the spark plugs and see if it gets better. It is labeled...
Thanks! I didn’t realize i am supposed to measure across stud instead of the closest stud across. I have 3 newer 4x100 in 13” rim given to me. I...
So i need to replace one of the wheel rims and i took out the measuring tape and it has four studs and center to center stud distance is just shy...
I measure the original rim, and it is approx 4x70mm. It seems to be original. can i get an adapter so i can use 4x100 rim on 2 of the wheels?
I am measuring the stock wheel on my 91 sambar and it has 4 studs and center to center across is just shy of 3". But i thought 4x100mm was the...
Lol, thanks for your encouragement. I will try to bleed the brake again tomo with the brake pedal, instead of the hand held pressure bleeder.
Its pretty tight but i may give that a try. I tried hitting the caliper metal frame with a hammer, hoping it may unstick things a bit. The truck...
So i have another master cylinder ready to be put back. Should i do fill the inside with brake fluid, and what is next step? Also, i am trying to...
Deleted, combined with first thread
I was actually able to clear the gunk that allow the air valve within the carb to spring freely and i took out the tank where the jet is, will see...
Separate names with a comma.