Locating dowels protruded just enough to hold gasket in place while installing head. I’m tired of working on this after replacing carb; timing...
No chance of diesel and white smoke is water vapor. Also drips out of exhaust. Checked compression and it’s 150 in two cylinders and 160 in the...
Yes and they look good. In the next couple of days I’m going to do a compression test and listen for leaks in exhaust and intake. It’s running...
Sorry for my previous thread so here goes. I have a 92 s83 p with the following problem. White smoke (steam) out of the exhaust. I pulled head had...
Having problems with white smoke after head repair and gasket replacement. How else can water get into combustion?
Have a 92 daihatsu s83p-Gdm pickup. My problem is the following; truck overheated when radiator went dry, steam out of exhaust, pulled head and...
greetings from upstate n.y. am finally getting things worked out on my 1992 s83p but final issue is rpm's surge upon releasing throttle when...
i have a good used 2 wire low-idle fuel cut off solenoid from my s83p with 87b54 carb. rebuilt my carb and thought the solenoid was bad. replaced...
finally after 2 years of off/on work to get this 92 daihatsu running well i'm very close! only problem remaining is engine surges after shifting...
thank's limestone for the vacuum pots info from jigs n fixtures. as to the carb it couldn't be any cleaner and the choke works like it should and...
my symptoms are that truck RACES when first started. like 4000 rpm's and no ammount of adjustment helps. when it warms up it will not respond to...
JMM, the vacuum diagrams that you have posted here are the best i have seen. i too have carb problems and think they are related to misrouted...
am looking for a vacuum line routing diagram and diaphragm location for a 91 s83
first time it was ultrasonically cleaned by a professional shop. when i just pulled the carb i just checked the float bowl and needle valve and...
have checked idle cut off solenoid and it's working as it should also checked the vacuum diaphragm for operation. am wondering what other systems...
greetings from upstate new york; new to me S83P 1992. have been working on carb and vacuum to get this thing to run right. so far replaced 25 feet...
Separate names with a comma.
