after a lengthy search, I believe 1990 Actys, Do Not Have TTY head bolts. Manual covers torque sequence and value. But no mention of a final...
I already posted the fuel section up above, that all I have.
I am not sure what you mean by "get the CV joint to lock into the shaft on the axle side" Wheel end of axle has a CV with splines and a nut . ....
watching
You can remove the choke mechanism. Bypass the hot water, just connect the hoses to each together. Zip tie the choke open. Then you'll know if it...
A moment free. Realized it might be better to get colors and location of wire in harness. Pages show connector type, location and colors in...
I will take a look into that, really busy thu weekend, so might be mid next week, if you don't hear from me "soon" , remind me. sometimes I need...
I looked at your picture , you have a carb. I would spray starter fuild in it and see if it starts on that. if it does, it is a fuel problem,...
good to hear it is working for you. Just to be clear for anyone reading this, double clutching means when down shifting, push in clutch, pull to...
remember too, new parts aren't alway good.
First there are no "cold start electronics" it is all mechanical, wax choke and vacuum to pull cold timing. If you have your fuel mix completely...
it sounds like you know how to do this, just a reminder . . when you fully seat (close) the mixure adjustment the engine should stall. if it does...
you can replace the syncro, if you want to pull the engine. I had a bad 3rd syncro, and low compression in one cylinder. The motor and trans...
that sound cool to me, you have peaked my interest, I will study the wiring diagrams today.
sorry I do not, but any good bearing place (store) should be able to measure and order, if not in stock.
https://minitrucktalk.com/threads/electric-puzzle.22293/#post-129495
not even a please. . . I don't have 89. . . 94-96. as far as I know it's the same. thats 14 pages. not complaining just the scanner is not set...
have you ever pulled and axle? I think it is easy, but I've done it many times. if you do, doit, just take care the parts inside the CV joint go...
sadly I didn't take a picture of this when I rebuild my carb. #3 the metering needle valve might have an adjustment on it. or you might "find a...
https://jp-carparts.com/honda/partlist.php?maker=honda&type=ACTY TRUCK&cartype=30939&fig=B&fig1=1730 I cant tell which one it is from picture, I...
Separate names with a comma.