Where did u get the vacuum actuator from? I have a DD51T but what you have should work for me as well.
Hello, I have a 1993 dd51t and just put in a new/used rear axel with diff lock. My truck did not have the vacuum solenoid with it when i got it...
Does anyone know where I could get a Diff Drop Kit for a 3 inch lift kit for a 1993 DD51T? I believe it needs spacers for the cross member and a...
I have a 93 Carry with a Dump, I have literally replaced almost everything on this truck without getting into the real guts. I have a very loud...
The hole on the right should be where the hose runs to the hose that runs into the airbox to heat up the carb in cold temperatures. The hole on...
Try www.grimports.com I just bought a new one from them, around $400 after the $100 core return. It did come as a 3+3 carb which is a little...
U said it revs up perfect without the hose on correct? When is the last time u changed the air filter? Also have u checked to make sure all of...
Have you adjusted your Base idle Screw? It is the phillips screw on the side of the carb facing the front of the truck. If everything is running...
Yes i would start by turning it all the way in until it is completely seated, that is as far open as it can get. You can always work it back once...
I think ur carb is running too rich and it needs more air. Take off the black hose running to the air box from the carb. Start ur truck and Take...
Ah ha...u will need to get the vacuum lines hooked up correctly before u can diagnose the true problem if it is still occurring after that. There...
Provide a little more info...what gear or speed are u in when it bogs down? Explain the bogging down in greater detail as well. Are u just not...
The canister is a charcoal canister' it is not needed and can be bypassed.
A 2+3 or a 3+2 carb will work on ur truck the only difference is the #1 port is reversed. Use the diagrams suggested on the forum and the image on...
Looking for a 93 Carry Passenger side mirror for a right hand steer.
I would say it is one of the following: 1. Float staying open 2. Choke Flap out of adjustment and not opening up at full throttle, could be the...
There are a couple different threads in this form on snorkels you should check out. Here is one....
I used JB weld and 1 1/4 to 3/4 copper reducer from Lowes then got a 1 1/2 inch 32 inch long and 17 inch long preheating tubes from Napa...
Just an update for everyone I was able to fit a 17 inch belt on there, but i believe a 16 inch would work as well.
Contact ww.grimports.com for the CV axle. I believe there is a serial # behind the driver side seat you can google to find your model #.
Separate names with a comma.