If its a slower knock its from the bottom end and may need bearings. If its a faster tick tick tick its most likely from the valve train. May need...
Hi sorry, been away for awhile. I have done water crossings no issues. The hoses I had coming off the exhaust are heat riser hoses made of paper...
Cool, great info! thanks for the link. My truck is 22 yrs old so I'm guessing I could ignore the EPA cert. As far as limiter, My truck in 4th...
[ATTACH] [ATTACH] I lowered the filter a bit and upgraded the zip ties to 2.5" cushion clamps.
Ive never heard of this Vermont thing. Ill look into it. Wondering about reciprocity issues but sounds like a good loophole.
Glad you found it. Thanks for reporting back.
Thats good info, too bad mines a 95. Sounds like a giant PITA for a plate and a lot of trips to the dmv to deal with the bitches behind the...
good luck, From what I researched they ruled against it and state that the safety regulations don't match foreign market standards and were never...
I use these guys for my parts for my carry and they are fair priced. Also eBay and some forum searching and you may find the local parts...
Its a heat tube for preheating the intake air for cold starts and faster warm up. From the exhaust manifold it should have a paper like foil tube...
I just made a snorkel post. check it out. https://minitrucktalk.com/threads/snorkel-101-how-i-snorkeled-my-95-carry.17948/
PARTS: [ATTACH] Uni filter I got at summit racing. [ATTACH] Shop vac hose I got at home depot. [ATTACH] drill hole in floor. [ATTACH] best...
Here it is. I may lowe the filter and I want to get better clamps for the hose but its works fine. I used a uni filter on the top. I may do a...
I need to figure out how to resize the pics . Apparently they are too large to post.
I believe so. I never adjusted or removed that screw during the carb rebuild . I wish I would have now and blew some brake cleaner through it to...
I fixed it! I found that the center screw between the vacuum ports was almost closed. I assumed it was idle mixture because I had my vacuum gauge...
My truck kept dying in me because the screw between the carbs was almost closed and I had a few vacuum leaks. I set that screw to 1.5 turns out...
Well I assumed the screw was idle mixture and sure enough it is. I set it to 1.5 turns out and fine tuned the idle to spec using the butterfly...
sounds like a CV joint noise or transfer case chain slap. Could also be in the rear end. A fluid inspection would show any signs of metal.
Love it, wish mine was newer.
Separate names with a comma.
