Hi all. 96 Dd51t, f6a. Rebuilt head and carb. Cold idle screw (#5) all the way out. Runs good for a bit then WOT. Applying vac (with mitt vac) it...
Cheap fuel pressure regulator did the trick, though I had to figure out that when Mr. Gasket say 1psi, it really means 2. Starts good and so far...
Ummm, starting to get tired of ice cream… ordered a cheap pressure regulator cause I can’t think of anything else to check.
No start…bra, bra, bwaaa…
Sooo, while exploring the backend of the truck, I saw lines going up over spare tire. Fought with rusted bolt to get tire out (good thing I didn’t...
How much pressure is there supposed to be in gas tank? It gives quite a whoosh when I take the cap off. (Canister is already bypassed. Could that...
Wait! Dig out a new tube of ice cream…so back to really hard to start in morning. Uber flooding. Moving choke flap has no effect. Once started,...
IT’S ALIVE!!! So the carb kit had a new needle valve and seat part but it was the needle was wider than the original..oh,oh. The screw holding the...
So, took off carb, blew into gas line and closed off needle valve seat. Felt are in my cheek. This is hard to describe- with fuel inlet on right,...
K, carb cleaned etc. Clearly deserved an award for running at all considering the grunge in it! Pushed it out of garage, turned the key and exact...
Guess what finally showed up in the mail today? Now it’s way too hot to work on it, lol. I will update soon.
Sooo, long delay as carb kit apparently has to do a 2 week quarantine at the boarder. It left LA customs June 26th?? Or maybe it’s walking to...
Thanks. There is a return line from truck box side of carb going to rear passed the fuel pump to another filter then into top of gas tank. I have...
Fuel return line is clear. Seems to me too much pressure in gas tank but I’m no mechanic. There is no vac at carb post #1 for idle up either...
Was running but hard to start. Now no start. Fuel pooling on lip of carb at air intake. Evap canister bypassed, plugs cleaned. If I remove gas...
mine did that on #1...spark plug had loosened off...tighten it up and all was good.
I have replaced all vac hoses (correctly), replaced fuel filter, canister is free flowing, new air filter that fits, choke flat completely closed...
So I cleaned contacts on relay and it seems to be working now...have to go for a drive and see if the starting when warm prob is still there.
yep. But I noticed today that the "click, click, click" did not click when I turned the key...worked 2 days ago. I'm not real confident on how the...
95, DD51T... So here are the symptoms: only when its really cold like -20. Truck starts in heated garage. Then I drive till engine is warm (30 km...
Separate names with a comma.
