The rounded head extractors do work. But use lots of penetrating oil, and give it time to soak its way in. Also a few taps with a hammer, and...
HIGHLY recommend pulling the engine. You probably have a warped head. And the deck surface of the block may have warped at the same time. You...
The headlights are ground controlled. So troubleshooting can be weird the first time you encounter it. Check other battery fuses at the fuse...
VSV Vacuum Switching Valve. They can be vacuum controlled, thermostatically controlled, or electrically controlled. The one for the EGR valve,...
Was watching a YouTube video on the Keitora in Japan. And, they have cargo boxes similar to the American milk crate, which are sized to perfectly...
There is guy on eBay who was selling rebuilt S210P half shafts. I emailed him and he found a set of S110 half shafts which he rebuilt and sold...
[ATTACH] [ATTACH]
Click your name in blue, and then the information tab, and the signature field is near the bottom.
If they start ticking, and the oil is up where is should be: Then you waited too long, and the lash is too loose.
Welcome aboard, go to your profile and put the information on your truck in your signature line. Just click on your user name, and you will be t...
Sorry I’m late: Reading teh whole thread, I would hazard a guess that as the engines sat with just water and not antifreeze. And the resulting...
A lower Compression engine has a larger volume in the cylinder to push the compressed air/fuel mixture into. So, the effect of boost is more...
They were used to stop or retard air flow. Part of pre-computerized engine management. If you look on line you can find old tables which...
There used to be a place across the river in Vancouver, which could repair or build radiators. Wilsons I think.
And on my 94 S110, the grounds are white, or white with a black tracer. The carburetors with the two solenoids have one for the main jet, and...
A carburetor draws fuel from the float bowl only when there is air flow through the Venturi, to create a vacuum to pull it through the jets and...
Unless you do major suspension redesign, stay with higher rate springs of the stock length. If you install a longer spring onto the stock...
Valve out of adjustment will not cause wet plugs. Number one cause of wet plugs is too rich of a mixture, or bad valve stem seals. My first...
Try checking in with the guys over aat the “livetodai” forum. they are wealth of knowledge for everything Daihatsu.
re used to be a guy on the forum who put a flat six engine from a BMW motorcycle under a Daihatsu Atrai two wheel drive. Said it would go like...
Separate names with a comma.