Cool... take lots of pics and let us know how the ride is with those 275# er's
Rear shocks for 1997 Honda Acty HA4 Any intel on rear shocks for a Honda Acty HA4 class truck... 1997. I'm actually trying to find a set of...
Yes, the ratchet straps will work... I actually used a couple to get out of a bind using the "over-sized" tool I rented from the auto parts...
I tightened the Rack Guide Screw and eliminated a majority of the rattle... still rattles on rough ground/bumps. [ATTACH] Tightening it...
Here's the tool I used, rented from the auto parts store. I would not advise using unless you have no other option. It's made for normal size...
Ahhhh... now that looks like the tool to use. I would imagine a little less wrestling involved.
Has anyone attempted to utilize air shocks for additional rear lift (as needed based on load) on a HA4 series Acty? I searched the forum and...
Can you post a picture of the old Macpherson strut spring compressor you used? I'm curious and CompleteLawnCare is getting ready to swap his...
I really don't have any other pictures. As far as help, if the 92 struts are the same as the 97, make sure you get the right spring compressor...
Replaced the factory coil springs in my 1997 Acty with 250# chrome plated Afco's Check out my post here --->...
Springs came today, installed them after work tonight and I'm pleased with the results. Thanks for the help! Here's my post on the install --->...
I replaced the factory springs on my 97 Acty today... got a little bit of lift, a stiffer ride and less tire rub. I dropped in a pair of 250#,...
I hear ya on the rubber hose! I plan to do that... until then, I have wrapped the chain with black electrical tape to keep the clanking noise...
Installed some tailgate limiter chains on my Acty from scrap parts I found in the barn. [ATTACH] [ATTACH]
All right, I've got a set of new Afco 10" Extreme Chrome 2-5/8" ID Coil-Over 250 lb Springs (Afco part no. 23250CR) headed my way... Ordered...
Ahhhh... now I understand. Makes total sense. I have a little 5' plow I put on my Honda Fourtrax ATV so I know what a plow can do to bring a...
What is your reasoning for going with 275# springs instead of 250# ? Is the ride bone rattling? I assume there is no difference between the 97...
Do you think #250 springs will provide much lift, if any? I could probably benefit from an inch of lift but don't want too be too aggressive and...
That's what I'm looking for... less travel and just a smidgin of lift, if any. Say, is this the part# you used for the #275? --->...
I'm always out on a limb with this little Acty :eek: From what I've been reading, looks like factory HA4 springs are 10" long so I should be ok...
Separate names with a comma.
