It does not have to be a harley carb. Probably almost any motorcycle carb will work, but I would at least try to get one off a bike that was close...
The carb was off a 1997 Dyna. Most carbs will not "bolt" on. That's why I had to make an adapter. It was not hard to do, but some welding is...
After another long weekend of riding, and fighting overheating issues, Im pretty convinced my head gasket has gone south. Truck doesnt actually...
ThE adapter will bolt on to the manifold, just like the carb bolts on now. Most motorcycle carbs are attached by a two id piece of fuel line to...
I used a CV carb off a Late model Harley davidson. Just had to build an adapter to mount it. I think it was a mikuni.
I used the bleeder screw and let out some air from the radiator system. No more bubbles. So far so good. Thanks for the info.
Flushed out radiator againand finally got rid of foaming situation. Now radiator is producing bubbles? A friend said this is a head gasket!!!...
I live west of San Antonio, Texas and was wondering if there was anyone living in the area that trail ride/rock climb, or just go riding. My...
I think my carb actually used 4 bolts to attach it to the manifold. Anyway, if I could have found one of these that fit, I would have certainly...
I used a 3/16" plate to bolt to the manifold (this is where the original carb bolts on). This plate has a hole in it roughly the same size as the...
I used a Minkuni off of a Harley Davidson motorcycle. Had to make an adapter to hang the carb on but it seems to work pretty well, although the...
Bee trying to figure out if I have a bad head gasket or not. Inittitally, I put some radiator stop leak to fix pin hole leak in radiator. Stopped...
I am think about selling my truck to upgrade to newer truck with more options. Truck is a 1990 LHD Mitsubishi. It is a 3 speed. The governor is...
Dan, I am still messing with the timing on the truck. The original ignition timing calls for 6' BTDC +-2'. Is this still correct? Or did that...
I'm wondering if the final drive ratio on your van (automatic?) is different than my third gear? Anyway, thanks for the info.
Ill go ahead and ask another question since math was never my strong point. With 23" tires, and in 3rd gear, going 33 MPH, how many RMPs would I...
I dont plan of being on the highway, but with my three speed tranny, I am curious how high I can safely run it. I've heard the redline was 8,000...
Yea, tell me about it. There is a guy by the name of Dan on this forum. He is the guru of Mitsubishis. He has provide alot of info, especially...
ok. Diagram did not load. Hum? I found the HEI diagram on this site. It is attached to another post about Cheap Mopar electronic ignition. If...
I am in the process of figuring this same issue out. Let me first say that I am still working on this, but it is running, and I have eliminated...
Separate names with a comma.