Forgot to mention, drivability with the pwr valve vacuum hose removed is totally fine.
Hi All, The stumbling has returned.. Although this time I started to remove vacuum hoses at idle to see what happened.. turns out that if I...
haha.. likely. Based on what you say I'll re-grease! Thanks for the tip! This has been many months of battling.. and at the end of the day it...
I'll answer my own post. I got impatient and pulled the sender out.. the tarry substance appears to be a really heavy grease - I'm not sure why...
Dropped the fuel tank - she's full of black crap in the tank.. before I get the fuel sender out, what's the right sealer to use on the top? The...
Ahhh I see. That is good to know. I thought there was something wrong. I need daytime running lights and unfortunately the guys who wired it up...
My idle drops from 1000RPM to 850 if I turn the fan on full blast and all lights on because of the increased electrical load. I read in a post...
Thanks OldMachinist. I leaned her out another 1/4 turn again tonight using the pilot screw, I am exactly 2 turns out now. I was running 2 - 1/4...
Your opinion on these plugs.. too lean, too rich, or just right? They are brand new and have about 400km on them. [ATTACH]
I know about the pilot screw (white capped screw near the throat). However, is there an air screw?
Oh yeah, my last few fill ups I'm getting 10L/100km or 23.5mpg fuel economy.
I've got an SDX (4x4), my manual says for my MT, it should be 1000 +=50 unless it's a (UL/DL) or something, which it's not. It still stumbles a...
Thanks - it helps to see what you're doing when it's daylight out :D I checked it out after setting my idle at 1050RPM the mark is slightly to...
Hi guys, Picked up a timing light - wondering where do I point this thing? The picture in the manual doesn't really tell me.. I'm having...
I'm wondering what size the red rubber fuel line hose dimensions are. I need to replace some hunks as it appears they are torn. I don't know...
Forgot to mention - when I 'leaned out' the float.. I bent the tab so that it would shut off flow of gas into the bowl sooner.. but when the float...
dang I thought for sure I licked this problem.. but it's back. Definitely running rich - the plugs are carbon fouled. Same sorta engine...
Yokohama.. they were great!
Pulled Carb, cleaned and back to running :D Hi Guys, OldMachinist - your pictures and instructions helped me out big time. I will post...
Solved I have been some 'normal' cleaner additive (STP or no-name brand) in the tank but maybe I'm using the wrong kind.. I have not tried...
Separate names with a comma.