I think the forum software updates clear out the older pics. I've re-posted them at least 3 times.
Marty, look at one of my posts a few responses down from the beginning of the thread. They are there.
Junked all my trucks a few years back, and just bought another. Back in the game, so to speak. Always been a Suzuki or Daihatsu fan for Kei's,...
Assuming electric fuel pump, it will prime for a few seconds, but is reliant on a rotational signal from the distributor or cam/crank sensor to...
I've been known to relax with PC games here and there. Found a kei truck in a recent adventure that looked rather familiar.. A "Sumitzu Carry Ace...
Should have an "L" or "R" on the caliper. Can't see your caliper that well, but easy to double check. Driver's side should be "R".
Great idea, and glad it worked out, but if I'm seeing the pic correctly, it looks like the calipers are on the wrong side. Bleeder port is always...
If you let the rears expand with the drums off, yes.. you likely need to take a look and see if the cups are seated in the cylinder correctly....
Well, I tried to upload in every way I know how, and no contact from the forum staff. If anyone wants the info, PM me an email address to forward to.
Greg, I have a PDF of some reference materials that would be of some value to the site, but cannot post due to size. (16MB). If there is a way you...
Should be listed on the alt. sticker (if there). All three of mine (Mid/Early 90's) were 30A. Typical upgrades for the Suzuki was to swap for...
I've scanned some of our reference books at work, and thought I would share. There are physical size specs (in mm), thread sizes, and...
White beach is still around.. just went fishing there last week. I'll find a pic.
Gaijin central.. down in Okinawa. :D Been here since 1991.
No slide window that I'm aware of. I've got no parts here.. at least nothing that wouldn't be astronomical to send via USPS. Cushions can be...
300g +/- 20 is the typical kei A/C capacity. 9.9 oz - 11.3 oz I always charge to the low end of the spectrum.
Correct.. when the mixture screw is 2 turns CCW, you may have to play with the idle stop screw to get a good baseline RPM for mixture adjustment....
Just to clarify.. your CO fine adjustment is the air/fuel mixture screw. Adjusting this is the "Meat and potatoes" of carb tuning. It can be done...
I've been away for quite a while. Busy life, and trying my best to bolster Japan's declining birth rate. I'm up to 4 now. I've junked 2 more Kei...
Separate names with a comma.