they make needle greasers that fit the grease guns mine looks like a syringe
then with oil in the cylinders retest for compression not sure what these have for timing markers on the pulleys
i would recheck the timing belt and is this one cylinder or all that you are getting that reading on second may want to put some oil or marvel...
It looks like fun but this might be one of the reasons they don't want these to be street legal in the USA.Your face will be wearing the bumper...
i would spray a little carb cleaner into the intake see if it fires
i have one suggestion that may not be related to sponsors but i think would improve the site would be read first unread on new post be on the...
lawngascaulk if need a hand trying to figure it out message me i'm off of 75th and bethany home shouldnt be too far away
i kinda like my dump bed lots of rear access but still limited room to get to the front of the engine
i saw the one with the bad engine on craigslist about a month ago but it was pulled was looking at purchasing it. so i placed a ad on craigslist...
sorry i got an email from the guy who has it last nite
i would have sworn i seen this one on craigslist for 500 with crankshaft pulley issues but i t may be another
i have a handfull of 5" stacks pulled off trucks
If you wanted to go to an open element most part store sell cone filters and intake tube to fit cars like Hondas ,they start at about 30 dollars...
you could use plow lights that have the turn signals built into them....
thought if someone were close and wanted to spend some time on it...
i have a older 89 ( i think ) left hand that has a 4 speed and hi/low transfer case that is 2wd
ya but who makes these for them
what models does this cover?
most R12 system charges are higher than r134 so charge to approx 75-80% of a r12 with r134
a/c retrofitting I would not suggest getting any cleaners in the condenser or evaporator especially on parallel flow type because the fluids may...
Separate names with a comma.
