What did you do to your truck today?

Hahaha I like it when that happens haha

 

Because the struts are not on the END of the A arms.
I don't know the terminology,
but you have a lever and a fulcrum of a specified height, you can raise the load a certain distance ,
a taller fulcrum will will move the load a greater distance than the increased length of the fulcrum.

If that makes any sense to anyone else.

 

I was going to say the same thing. Thats why my 3 1/2" lift gave me a bit over 4 inches

 

I fixed my front mud-flaps...
When riding in the bush, my rigid fiber-glass mud flaps got damaged . To fix the problem, i cut them, and i
Instal a flexible rubber flap. I used atv type plastic push pin to fix the rubber flap to the original flaps.
I now have a better protection against rocks and mud throwned by the tires, and they are very flexible.
I did a lot of rughf terrain they work very well.
Il try to insert pictures.... View attachment 12959 View attachment 12959 View attachment 12960 View attachment 12960 View attachment 12961

 

Put a new starter, new wheels and tires, and adjusted my valves which fixed my cold start problem!

 

new thermostat, distributor cap, rotor, plug wires, plugs, tailights, washed it.

 

I instaled new bucket seat in my carry,they are from a Smart cat (Smart fortwo) They are the best seat
For these mini truck, verry narrow, and the seat bottom is about 3 in hi.
I got them from A car scrap-yard for 360 $ for the pair. The passenger. Seat fold down 90* very useful to
Load more stuf. Il try to ad pictures. View attachment 13158 View attachment 13159 View attachment 13160

 

Pics no-work'o,

I'd like to see the end result though.op:

 

Il try to ad pictures once more ,i dont know why it dont work? Is it a BUG, or am i doing something wrong?
Is there a trick? Here is the photos, hope it work? View attachment 13162 View attachment 13162 View attachment 13163

 

God when I started this thread I would have never thought it would get this huge!

Anyway, that's good to see.


So...What did I do to my truck today?.....I sold it.........But don't worry, I bought another one.

It's coming across and up from Massachusetts tomorrow on a low bed, all the way to Seattle, then on to another low bed to Vancouver. Where I will meet up with it and drive it up to it's new home here on the Sunshine Coast in BC.

Poor thing will be traveling many, many miles.

SO excited !

Steve

 

Hahaha you gave everyone a place to brag/cry hahahaha good job!!

 

We took a ride to our summer fishing hole on the Kenai river. Was a beautiful day till the sun set hahaha
View attachment 13164

 

Nope, ALL those pics failed to ref.

muddy moose

Too,
You guys need a tutorial?

I think that I posted one in here some years ago, but I could walk you through it if "still no work'o".

 

BORED...:sly:


Don't forget about the advantages of a remote URL. Is it hosted here? Or there? (to check-mark, or not)

Here is a SMALL .jpg...




Here is a LARGE .jpg...


Now, ref them locally, via the MTT site...



A triple hosting example,
URL, ref the site to here, then ref here for the post,
Then you get the raw data, the actual size,
Now, these pics live here, on this site. A Google/Bing search would produce a return to both the original hosting site, and now here as well; "Minitrucktalk" now "hosts" these pics, forever.:sly:

AND, don't forget about .gif...cu'z they are way cool,

A SMALL .jif...

(see bottom " Attached Thumbnails")


And a LARGE .jif...



Local ref now, and raw data,






This MASSIVE .jif cannot be ref'd locally, as it is too big for the site.


understand?



Not showing-off really, you do this 500 times, it's all the same shite, dif pile...

 

(NOW, check this out...)


BORED...:sly:


Don't forget about the advantages of a remote URL. Is it hosted here? Or there? (to check-mark, or not)

Here is a SMALL .jpg...

View attachment 13166


Here is a LARGE .jpg...
View attachment 13167

Now, ref them locally, via the MTT site...



A triple hosting example,
URL, ref the site to here, then ref here for the post,
Then you get the raw data, the actual size,
Now, these pics live here, on this site. A Google/Bing search would produce a return to both the original hosting site, and now here as well; "Minitrucktalk" now "hosts" these pics, forever.:sly:

AND, don't forget about .gif...cu'z they are way cool,

A SMALL .jif...

(see bottom " Attached Thumbnails")


And a LARGE .jif...



Local ref now, and raw data,






This MASSIVE .jif cannot be ref'd locally, as it is too big for the site.


understand?



Not showing-off really, you do this 500 times, it's all the same shite, dif pile...

 

mini tutorial

That, is an example, of an entire post, that is "hosted" on this site.

For most people, because we have advertising here, you will see both posts "squeezed" to the left side of your screen, with advertising along the right side. (large pics will not "fill" your screen) but are "resized" anyway to fit-in the advertising...:frustration:

If you have a "good" blocker, like ABP (ad-block-plus), then the right side will just appear to be a blank white margin.

If you have the "good-surfing-stuff", then the second post will fill the entire screen (left-to-right), and you will see the full sized .jpg(s) as well as the .gif(s).

The lesson to learn,
what you see, or what you post, is NOT what others see.

Depends on the site, your system (ad blockers) AND, what has been authorized as "paying-ad-systems".

???

SURPRISE...

(full blockage, go post, go advanced-post...scroll down to previous posts...no ad encoding source code)

 

Huh?????? What???????

 

Disregard, just me talking crazy again,

Back to dark-net,

...

 

I understand.......PWI again? (Posting While Intoxicated)

 

Yea, sometimes; posts via the "green fairy" whilst tossing back "black dogs", mostly though, I tend to post too much information into one post, then, if someone posts a "Hunn?"; combined with a brain-fart, I tend to just roll-over-stupid, :sly:

Not going to explain the shite twice...

They can figure it out, if they really wanted to...

 

I'm sorry to tell you this.........I'm mechanical in nature. If it's nuts n bolts cutting and welding making something out of nothing or making something someone else made better I'm good. Do quite well in fact. BUT....... When it comes to all those three letter gif. Tif.........I'm lost. Half the time I can't figure out my phone. I grab my big hammer named Thor and fix it......hahaha. might be able to get one of my kids to decipher all that for me.

 

I agree with moose,anything mechanical is or soon becomes intuitive but these damn computers there is nothing intuitive about them.Every time I try to post a pic I have to get the wife or one of the grandkids to help me. And trying to do this animation stuff?Forget it! I would end up throwing the whole computer through the window.
I guess it's a generational thing or something because the grandkids just take to it naturally.

 

I dissagree, everybody started somewhere, generational my ass,

At one point in time, I didn't know how to wipe my ass, now I'm really really good at it.

The same thing applies here.

Start a new thread with a specific question related to thread posts, links, or pics, and I'll try to help out.

 

I'm pretty good at that ass wiping too but that is like nuts & bolts..pretty intuitive after minimal instruction..I prefer that John Wayne tp,rough and tough and don't take any shite off any one,but I look at computers like I do light bulbs.Flip the switch and it works ,or change the damn bulb, no chasing it's tail updating itself and a gazillion tiny un decipherable icons that are supposed to mean something.I'm probably just too lazy to spend the time and endure the frustration of it. With that said I really appreciate guys like you that can figure it out and make it work.

 

That's not the case at all Jim,
It about rolling over, or going on the attack; period.
You're currently in a state that we like to call "resignation".
Snap the frack out of it. (Can't post ****)

Me, I'm on the attack; always. Round and round, circle attack, circle attack.
Attack it, kill it, then smile about it. The day you can't do that...it's over.

Take this example of "Email-Tags". I've gotten to the point of being really really pissed off about something so simple. Email tags. The shite you get at the end of emails that make people's shite seem like it's all that, and a bag of chips..he, he...(Can't post ****)

Laughing, cu'z you'll know when you read it.
So, I've come up with my own Email tag. Personal, business...it gets tagged to everything. (cu'z email is a joke, crib note, piss paper)
My biggest smiles comes from tagging it to my "Hydro" or "Gas" respodent emails...

Here...

WARNING!!!
This message is intended for the addressees only.
It may contain personal, confidential or privileged information. No rights of confidentiality or to privilege have been, implicitly or expressly, waived by "ME". Any review, copying, retransmittal, dissemination, taking of action or making an omission, or other oversight, in reliance on, or other use of the information in this communication by persons, aliens, or entities other than the addressees is prohibited without the prior consent of "ME". If you have received this message in error, please reply to "ME" first by e-mail and immediately destroy your computer prior to reading, copying or forwarding the email to anyone.

SO SAYITH "ME"...

Thank you for your cooperation.

 

Hahahaha. Right on. Spaner

I tend to get confused and soon after.........angry. .....I think bit all comes down to three things.......
how bad ya want it
What are you willing to do to get it
How long are you willing to go without it

Every decision I make is based off those 3 questions or variances of them. Apparently my answers are

Not bad enough
Not enough
Forever

Because no matter what I do I end up missing up the computer while trying to teach myself how to do anything more than click the button hahaha

 

On a tractor forum I belong to a young guy from Croatia built a backhoe that is a work of art and when asked how he did it he said "I have a wire for it".Spaner has a "wire"for computers that moose and I don't have.imho

 

The rk 525 prototype?

Pretty scary level of talent there..