Has anyone tried these on there Mini. I know they are 4X110 which will fit the Daihatsu's. The Suzuki is 4X100 or 4X115 and the Mitu's are 4X115 as well. Is anyone using adapters with these? Where did you get them? Any advice on this option would be appreciated. I have a chance to get take offs at a low price. I did try to put a front rim from the Rhino on the Daihatsu and it fit but the bolts would have be replaced becasue they were to short. The rear rhino rims were a little to wide for the back so I would basically have to use Rhino fronts all around. Thanks Jeff
Funny, I have a Diahatsu here and also have a rhino, so just 2 nights ago i was measuring this possibility and jacked up the front of the truck and the rhino rims slipped right on. I have the Rhino SE which comes with the alum rims which I changed out for some ITP and 26 inch tires now on the Rhino. The stock Rhino tires are 25 inch and I could turn lock to lock with and no contact. ( on the Jack) It would need at least a 2 inch lift to make this work off the jack. Yeh the rears a little wide.
Some will wonder about Keith's response here. I kindly answered his multiple questions. I will not post the immature comments he sent me via PM or email. I am unsure why he was upset with my responses nor do I care. Beware!
I have rear rhino rims and 25" tires on a mits. Slight mod on offset and it worked great. I like the extra width for increased flotation.
I started with a spacer ring but have since cut the center of the wheel out and moved it about 1/2". It was only held in with 4 welds and was a quick job.
