1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What did you do to your truck today?

Discussion in 'General Truck Info' started by Coast Steve, Aug 25, 2010.

  1. oldsnowman

    oldsnowman Member

    Hey Dan
    how are thing?.....do you know where i could get a posi or a locker for my rear on mt 92 mits U42T. here are some pic's of what my truck is doing now,
    P1030695 BC.JPG P1030693 BC.JPG P1030659 BC.JPG
     
  2. firejonny89

    firejonny89 Member

    Best bet is call around to dealers like g and r and see if they have a locking rear end I don't think anyone makes a locker kit I wish they did cuz I'm still looking for a locking rear end. Now there was someone making limited slip kits but I believe he stopped making them I have one in the back of my truck but a locker is still nice to have.
     
  3. Stuff99

    Stuff99 Moderator Staff Member

    contemplated getting the truck in to get the seal fixed/changed... need to rescue it from my dad's lot as its becoming a work bench again..
     
  4. greg0187

    greg0187 Moderator Staff Member

    LOL I know what you mean. Mine makes a nice workbench. I think thats all it gets used for.
     
  5. vtg

    vtg Member

    What did I do to my truck today? Basically, I just cursed at it for awhile when it decided it wouldn't start out in the middle of absolutely nowhere. Then I proceeded to walk the 6 miles back to civilization because that was my only real option (no cell service).

    This has been an ongoing prob with my Acty for a few months now. It almost always runs fabulously and starts readily. But every now and then, it just decides to not fire up (starter cranks well). Not sure if it's spark or fuel related because I never have any wrenches handy when it happens.
    I'll get a ride out there tonight and pick it up because I know it'll start right up later and will again run perfectly for a week or so before it leaves me stranded again.
     
  6. Jim Nelson

    Jim Nelson Active Member

    Got seats and door panels done also carpeted mos of inside cab and new radio. DSCN2815.JPG DSCN2813.JPG DSCN2814.JPG
     
  7. firejonny89

    firejonny89 Member

    I loaded 1227 pounds worth of new fire house in the bed at 9am I didn't get any pictures was in a hurry but I still had some more spring left.
     
  8. Deanclean

    Deanclean Member

    Line-X

    Today I picked up my truck from Line-X in Cambridge Ontario. They did a great job. I got them to do the bed, battery cover, wheel wells, and coat the tool box I had. Its pretty much ready for winter now.
    Ryan
    linex.jpg lineeex.jpg lineex.jpg
     

    Attached Files:

  9. fupabox

    fupabox Well-Known Member

    looks great :)
     
  10. axle

    axle Member

    DSC00018.JPG DSC00031.JPG DSC00032.JPG DSC00048.JPG DSC00049.JPG
    rear manual winch.
     
  11. allen0288

    allen0288 Member

    Happy Halloween 2012 mystery machine.jpg Did this for a halloween party. Painted with temper paint, washed off at the car wash in 10 min/
     
    Last edited: Oct 31, 2012
  12. greg0187

    greg0187 Moderator Staff Member

    Your mini got dressed up for Halloween! Thats awesome allen!
     
  13. spaner

    spaner Well-Known Member

    That's some wicked shite there axle; reminds me of the dominican.
     
  14. cbarlow

    cbarlow Member

    mini 17s.jpg

    I put a set of 17 inch rims on my truck. Im in the process of removing and fixing rust holes on my bed sides and getting ready to paint the whole truck black
     
  15. Daner

    Daner Member

    Those rims make me think you need to bag and lower your truck. lol
     
  16. cbarlow

    cbarlow Member

    ha na those rims are just for the road its lifted 3 inches
     
  17. That must ride like a buckboard with those low profile tires!
     
  18. cbarlow

    cbarlow Member

    Its actually a good ride no worse than my 15s I had
     
  19. Sambarmon92

    Sambarmon92 Member

    SOLD it :(:(:(. To VERY NICE people ! :):):)
     
  20. Stuff99

    Stuff99 Moderator Staff Member


    Good to hear it is to very nice people! that is the second most important part lol
     
  21. Sambarmon92

    Sambarmon92 Member

    You're right. :) It was tough letting it go, but at least it's in good hands.
     
  22. nachtigallian

    nachtigallian New Member

    photo.JPG
    Got my truck about a month ago. Here it is on it's first firewood run. Installed rear hitch and had the whole bed sprayed with bedliner. Inside, outside, underneath. Thanks to poltergeist for the pelican case storage box idea. :cool:
     
  23. cbarlow

    cbarlow Member

    Looks good shoulda sprayed the whole truck im getting ready to paint mine with bedliner
     
  24. firejonny89

    firejonny89 Member

    That's a nice medium sized load I've rounded mine up a little more but it's for very short trips more than half a mile that's about all u want to load without straps.
     
  25. Coast Steve

    Coast Steve Member

    Had 2 new Federal 10 ply steering tires mounted and balanced. I also had a front wheel alignment done.
    All together it was $650..........damn.
    The tires feel way better than the Yokohamas and these ones can take 81psi, unlike the 65psi of the Yoki's.
    I need the extra plys and the higher psi for the heavy loads carry sometimes.

    Who doesn't like new tires.
     

    Attached Files:

  26. Daner

    Daner Member

    Well drove the mini out of the barn... hooked up my homemade plow. Then found out the winch is too cold to turn so I used some baling wire to hold up the plow so I could see how far down the driveway I could make it. Turns out not that far. Barely made it out of the yard before I caught the edge of the ditch and I was dragged down. Floored it thinking I could maybe push through the ditch drift and make it to the shallower bottom but I didn't quite make it. :p We got about 10-12in of light fluffy stuff last night.

    2012-11-10_11-10-54_204.jpg
     
  27. vertec92

    vertec92 New Member

    we only got about 7in of snow down here but it was fun spinning around in it.
     
  28. El Ventu

    El Ventu Member

    Today I almost finished my DIY exhaust system.
    P1060886.JPG

    You can see more HERE
     
  29. El Ventu

    El Ventu Member

    Finished :D
    Sounds lovely

    Immag0294.jpg
     
  30. Wedge

    Wedge Member

    Post a video so we can hear it please!
     

Share This Page