1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1997 minicab

Discussion in 'Mitsubishi Minicab' started by cgasch, May 22, 2012.

  1. cgasch

    cgasch Member

    Changed engine and now I don't remember how to hook up the main wiring harness to the new engine.Any help would be appreciated.there are two plugs that will plug in to two different places and I don't remember which goes where. Which plug is # 1?The truck backfires thru the carb when I try to start it. I also need a good reference book that will show me where everything goes.
     
    Last edited: May 22, 2012
  2. GR.mike

    GR.mike Member

    Give us a call and ask for Steve or Joe they should be able to help you out
     
  3. minitruck.ca

    minitruck.ca Member

    top dead center on the crank shaft compression stroke and you will have the number 1
     
  4. cgasch

    cgasch Member

    Whenever I hook up the plug to the alternator(not the large red hot wire) the engine backfires and won't start.I can unplug the wire and it will start and run. Why? What do these wire do?If they are disconnected will the battery be charged? Need help please.
     

Share This Page