1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mitsu mini cab ID problem

Discussion in 'Mitsubishi Minicab' started by BC1, Mar 7, 2010.

  1. BC1

    BC1 New Member

    I have a 1994 Mitsu minicab with a registration BUT the ID plate under the seat is missing, how do I find out the model?
    Also need carb rebuild kit?
    Remote unit to raise and lower the unit does not work,I think it's a wiring problem, any suggestions?

    Thanks
     
    Last edited: Mar 7, 2010
  2. Dan

    Dan Member

    yours is a (U15D) and the dump will only operate if the truck is running.
     
  3. BC1

    BC1 New Member

    ID

    Hi Dan,
    Thanks, what about a carb, need one.
    BC
     
  4. Dan

    Dan Member

    Sorry BC no carbs. What happened to yours? I've built a few and haven't seen one that wasn't salvageable.
     
  5. BC1

    BC1 New Member

    Carb

    Found Harley Davidson carb that fits the manifold. Will advise after installation, soon I hope.
     
  6. 3banger

    3banger Member

    Harley Carb in a U15 Minicab

    Please let me know how that goes. Have you sized up any other candidates?

    I was thinking of going with megasquirt and a throttle body of some sort... so anything you do with intrest me a lot.
     
  7. BC1

    BC1 New Member

    Harley Carb

    No luck can't find a good fit so far.
     
  8. sdjenk

    sdjenk New Member

    Changed to a TM33 ON MY 550CC

    :)Hey guys I'm kinda new to the sight but I put a mikuni TM33-8012 carb on my truck and so far so good.
     
  9. 3banger

    3banger Member

    Mikuni on a minicab

    Hey!

    Thanks for letting us know. I just had a look online and those aren't expensive.

    Can you let us know how the driveability and economie is? Do you get any flat spots or surging when driving through parking lots at 10mph?

    I see guys with thumpers like that carb. It'll be interesting to see how it behaves with baby 3 cylinder sips vs. single cylinder gulps of a thumper.

    Thanks again!
     
  10. sdjenk

    sdjenk New Member

    carb

    I will be using it for hunting and working around the farm. Don't think it will see any parking lots (tires won't last long). I am going to take some pics tonight and I will take some of the carb area so you can see how it's installed.;)
     
  11. renchjeep

    renchjeep Member

    I am interested in this carb swap, as well. Any pics yet?

    Thanks--Chris
     

Share This Page