We are Here Sorry we are back. Been busy,busy then had server/phone issues so weren't getting all messages etc. What can I help you with? Darc Samurai Trucks
Tracks So I have a 1992 Suz Carry. AtV Tracks said you guys buy lots of tracks for your trucks. I bought some Tatou Tracks for a Rhino. My question is are you putting sapcers on the rear and rear only. ( I think 1 ") My bolt pattern fit right on, it was 4 X 114.3. My other question is lift for the front. I have 2 " but think I need more and have to trim fendors. Also when you hook up the anti roll device are you just drilling a hole in the A frame and adding big washers. Any help would be appreciated. And or do you sell or make a kit to addapt the above?
I made the same purchas, 92 carry dump. tatou u4 18 tooth, Have you cut or trimed yet? I also have a 2" lift and it's not enough and looks like I'll need spacers about 1 1/2, I was under the impression, no cutting was involved.
Cutting required I also put a 1.5 inch spacer ontop of strut. I still had to trim about 2" Pie shape out of each front corner. I also purchased 4 -1.5 inch spacers for the wheels. (4X114.3) I had to make up brackets for the rear and front anti roll arms also. I had to cut the front threaded rods by 2 " also.