1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What did you do to your truck today?

Discussion in 'General Truck Info' started by Coast Steve, Aug 25, 2010.

  1. kyrbz

    kyrbz Member

    New tool box

    [​IMG]

    [​IMG]
     
    maboyce and Liberty4Ever like this.
  2. GeoJoe

    GeoJoe Member

    Very cool! Where did you find this?
     
  3. kyrbz

    kyrbz Member

    Amazon Japan
     
  4. SDK1968

    SDK1968 Active Member

    got off to a good start this morning. awesome outside (rain coming later)..

    got in the shop & got the muffler on the mini truck. every now & then i can be patient enough for things to go smoothly instead of beating myself to death to make it happen.

    this time rolled right out there, put on my shop clothes, cut the pipe off, stuck a expander in the pipe, bumped him out just a hair, slid the muffler up in there. nice & tight. fired it up. man that was sweet! made a hanger, welded it on, thru on a couple clamps. took it for a test run around the trails on the place.

    NICE! no more sounding like old glass packs on a v8. now she just purrs.

    good news is this muffler was for a 1.1L geo metro, so it flows plenty on this little 660cc motorcycle engine.

    now on to the next thing.
     
    Liberty4Ever likes this.
  5. GeoJoe

    GeoJoe Member

    ^^*congrats on the smooth install ^^*

    I got a net.

    Then I took a chance and rubbed some Vaseline on my faded FourCylinder 660cc sticker and brought it back to life!

    [​IMG]
     
    Last edited: May 9, 2023
    t_g_farrell and Drain like this.
  6. kyrbz

    kyrbz Member

    [​IMG]
     
    OhDeer and Bowe like this.
  7. OhDeer

    OhDeer Active Member Supporting Member

    Oooohhh, one of Uncle Malcoms originals. Got a build thread anywhere?
     
  8. t_g_farrell

    t_g_farrell Active Member

    Great tip on using the Vaseline on decals. I just rubbed some on the Joypop decals on my van and they really came back a lot.

     
    GeoJoe likes this.
  9. kyrbz

    kyrbz Member

    Unfortunately the restoration of this one is going to have to wait until I finish renovating a property that I'll eventually be moving to. Generally I hate buying someone else's projects, but this came with the motherlode of NOS parts and spares. Couldn't pass on it even though its in pieces. Here's a few more pics from that day

    [​IMG]

    [​IMG]
     
    Last edited: May 15, 2023
    Kevin Y and OhDeer like this.
  10. OhDeer

    OhDeer Active Member Supporting Member

    Oh wow yeah. The sheet metal looks to be in really good shape and you do seem to have a pile of parts. Should keep you off the streets at night for a while.
     
    kyrbz likes this.
  11. GeoJoe

    GeoJoe Member

    Replaced my old, faded and cracked window vents with a new set found on eBay.

    [​IMG]
     
    bentresearch and Liberty4Ever like this.
  12. Kauai Kei

    Kauai Kei Member

    4 new tie rod ends...and test fitted a single Miata "daisy" wheel with a 175/70r14 tire. All went well, so now I just need to find three more. :) Progress!
     
    OhDeer likes this.
  13. kyrbz

    kyrbz Member

  14. CVP33

    CVP33 Active Member

    Found a color matched front emblem + wash + wax.

    [​IMG]

    [​IMG]
     
    DOUGNASH, FL_Kei407, kyrbz and 3 others like this.
  15. Liberty4Ever

    Liberty4Ever Active Member

    I usually leave a Like and don't pollute this thread with a comment, but I just gotta say that is one sweet looking Toyoace. Wow.
     
    DOUGNASH, t_g_farrell and CVP33 like this.
  16. Kauai Kei

    Kauai Kei Member

    PXL_20230601_165754404.jpg

    Installed Early OEM Miata rims and tires...perfect fit, no spacers, no rubbing.
     
  17. t_g_farrell

    t_g_farrell Active Member

    Checked my engine oil level. All good!
     
  18. udidwht

    udidwht Member

    1990 Sambar Try XS SC

    1. Full tune up - Wires, plugs, rotor, cap - 5/12/23 52,055
    2. Supercharger oil changed - 52,055 5/12/23
    3. All ground connections cleaned - 5/18/23
    4. Sliding door rollers lubed - 52,055 5/12/23
    5. Front & rear shifter bushings cleaned and lubed - 5/18/23
    6. Fuel filter - 5/19/23 52,145
    7. Applied rubber conditioner to rubber hoses - 5/19/23 52,145
    8. Valve lash check and new rocker cover seal - 5/18/23 52,130
    9. Battery connections cleaned - 5/18/23
    10. New air filter and housing cleaned - 5/12/23 52,055
    11. New T stat and coolant - 6/9/23 52,632
    12. Diff. Fluid & Gear Oil - 5/18/23 52,132 (Amsoil 75w-90 GL-4)
     
    Last edited: Jun 13, 2023
  19. SDK1968

    SDK1968 Active Member

    its gonna sound & read weird..... didnt do anything to it in a bit.

    just using it everyday for the regular work & trails at the homestead.
    oh wait! i got it! WASHED IT! :)
     
    bentresearch and Liberty4Ever like this.
  20. bentresearch

    bentresearch New Member

    Replaced the lights in the cluster with leds, looks great but I don’t see the turn signals on the cluster(they work, just don’t indicate in the cab)
    Gonna wait a bit before going through the torture of removing it again.
     
  21. kyrbz

    kyrbz Member

    1964 Datsun 320, 1996 Suzuki Carry

    [​IMG]
     
    DOUGNASH, Kevin Y, FL_Kei407 and 5 others like this.
  22. Kauai Kei

    Kauai Kei Member

    PXL_20230620_020334012.jpg New Steering wheel! Also, new solar-powered Maneki Neko (beckoning cat)
     
    Slashaar likes this.
  23. Honeyman

    Honeyman Member

    Do you have video of the sound? Did you tie this into your steer wheel horn or is there another button you installed in your dash.
     
  24. Drain

    Drain Supporting Moderator Supporting Moderator Supporting Member

    Hauled a bunch of wood and my alignment got a little messed up, so I finally got under there and broke free all the 25yo+ jam nuts and got it straightened out :)

    [​IMG]
     
    Liberty4Ever likes this.
  25. t_g_farrell

    t_g_farrell Active Member

    How would the alignment change via the tierods unless they were loose to begin with? Did something get bent under there?
     
  26. Drain

    Drain Supporting Moderator Supporting Moderator Supporting Member

    That's what I thought but didn't see anything bent. Maybe it moved the rear around a bit and I was having to slightly steer to the right to compensate. I drove it around for a couple weeks to see if it would go back to normal and it never did.
     
  27. t_g_farrell

    t_g_farrell Active Member

    Alignment doesn't just change like that without something being bent.
     
  28. t_g_farrell

    t_g_farrell Active Member

    Added a hitch to t he van as using the racks for my kayaks proved to be fraught with peril and they were just too big up there.
    20230624_154544.jpg

    I got this hitch

    20230630_095315.jpg

    Write up on the process coming soon. Teaser from when it was complete:

    20230703_160144.jpg
     
    Slashaar, bentresearch, kyrbz and 2 others like this.
  29. Kauai Kei

    Kauai Kei Member

    Re: Previous post about new steering wheel....

    This ended up not working. The hub that I bought (based on a random internet thread), turned out to only sort-of work, as it did not support self-cancelling on the turn signals. Also, the horn button that came with the steering wheel was, to put it politely, crap.

    Purchased a new hub off Ebay that was supposed to be an exact fit...and it was! But it only supports 6-bolt steering wheels, and the Grant above was three bolt....but I did have a six-bolt steering wheel that I had bought for future use on my Miata. So for the moment at least, my Carry is rocking it. :)
     
    Slashaar likes this.
  30. t_g_farrell

    t_g_farrell Active Member

    A buddy of mine here in Charlotte ran into the same issue with the turn signal thing. He resolved it but I need to check and see exactly what was involved.
     

Share This Page